Tap the Technics Audio Center icon on your iOS device to launch Technics Audio Center.
※Warning: On iOS14 and above, you will not be comfortable using the app normally unless you [Allow] the local network search after startup.
If the command disappears and you are having trouble, please check the trouble shooting in 「FAQ」.
Welcome Screen
Select [Click here for new speaker setup] and proceed to the network settings.
Network Settings
After selecting the model to be set, follow the on-screen instructions to set the network.
Note:
Before starting the network setting, make sure that the wireless LAN router and iOS device are connected.
To use Google Cast playback, both wireless and wired network settings must be configured using the Google Home app.
Selecting a speaker
All target models in the same network are displayed.
Tap the speaker you want to use.
The 「SOURCE」 screen of the selected device will appear.
※The speaker name set in Google Home is displayed.
Selecting a song
1. If the 「SOURCE」 screen is not displayed, tap .
2. Tap the music source icon you want to play and select the song.
[STREAMING]
・If you want to stream, tap [Radio], [Spotify], [Amazon Music], [TIDAL], [Qobuz], [Deezer], [Podcasts] or [Chromecast built-in].
[DEVICE]
・If you want to play with the sound source of the speaker, tap any music source icon.
[HOME NETWORK]
・If you want to play back the song of a Music server or Network hard disk (NAS: Network Attached Storage), tap [Music Server].
・If you want to play back the song of your iOS device, tap [Music on this device].
Note:
If you playback the song in iOS device and NAS, it may take a few seconds(2-3 sec.).