Camera
Shutter remote control
You can use a smartphone to release the camera shutter. This operation can also be performed when the camera is connected to Wi-Fi.
Preparations
- Establish a Bluetooth connection with the camera.
- Turn off [Auto Transfer] if it is enabled.
- 1Tap > .
- 2 Tap the Record button to record.
- (Record)
Tap the button once again to stop recording. - (Single/Burst)
When Drive mode is set to Burst, press and hold or record continuously while sliding the icon in the LOCK direction.
- (Record)
Bulb Recording
Record with the shutter open from the beginning of recording to the end.
- 1 Set Recording mode to [M] (Manual).
- 2 Set shutter speed to [T (Time)].
- 3 Tap to start recording. (Do not remove your finger while tapping.)
- 4 Remove your finger from to end the recording.
- Slide in the LOCK direction to record with the Shutter button locked in the fully pressed position.
(Return to the original position to end the recording.)
- Slide in the LOCK direction to record with the Shutter button locked in the fully pressed position.