Technics Audio Connect

Convenient Function

Home screen

Connected codec

・This shows the codec being used to connect the headphones.

Codec	Indicator
SBC
AAC

Note:
The codec used is selected from those codecs that your handset supports, so there may be codecs shown here that are not displayed.

Amazon Alexa

・This is displayed only when using a setting which activates Alexa by voice. ・Alexa is not available in all languages and countries. Alexa features and functionality may vary by location. ・To use Alexa, install the latest Amazon Alexa app. ・After signing into Amazon, you will need to add headphones in the device setup.

Headphone name

・This shows the name of the connected headphones. ・You can edit the headphone name in "Setting" > "Headphone name".

Note button

・This is displayed only when there is a notification. ・When there is more than one notification, the number is displayed. ・You can view the notification details by tapping the Note button.

Headphone image display

・This shows an image of the connected headphones. ・You can change the color of the headphones in “Setting” > “Body color” .

Remaining headphone battery charge indicator

・This shows the charge remaining for the headphones.

Ambient Sound Control button

・You can set noise canceling and ambient sounds.・Select the functions to set with in the screen displayed.
■Noise Cancelling Reduces the sounds (noise) you hear from outside. ・Slide to adjust the level. *You can move to a position by tapping the markers to adjust.
■Ambient Sound You can get sounds from around you and listen to them through your headphones. ・ to adjust the level. *You can move to a position by tapping the markers to adjust.・Ambient sound is allowed through naturally if you select "Transparent" at . When you select "Attention", the music is paused to further emphasize voices in conversations and announcements. This can also be set in "Setting" > "Ambient mode settings".

Sound Enhancement button

・Sets the sound mode
・Select the items with in the screen displayed.

■CUSTOM You can set 5 sound ranges how you like.

Call Quality Test

・You can listen to the voice that is transmitted to the other party and make it easier for the other party to hear you.*You cannot check your voice on iOS12.

Menu button

・Switch to each of the screens.

:Home screen
:Ambient Sound settings screen
:Sound Enhancement settings screen
:Setting screen

Settings

You can change a variety of settings for the headphones and this app in the setting screen.
(The items you can set depend on the connected model.)

Tap the setting button to display the setting screen.
Tap the item you want to set.

■Introduction

Voice prompt

Switch the language used for audio guidance on the headphones.

Headphone name

Change the “Headphone name” displayed in Home screen, etc.

The headphone name in the following screens is changed.
Headphone name screen, Home screen, Headphone list screen, etc.
Example: When the headphone name is changed to “my headphone”

Home screen		Headphone list screen

Body color

The body color of the headphones shown in the Home screen changes. *Depending on the headphones you are using, the displayed color will be different.

■Actions

Add headphones

Pair with a new set of headphones.

Use other headphones

Connect with another set of headphones that have been paired. *This is displayed only when more than one set of headphones have been paired.

■System

Auto power off

When a period of silence continues for the set time, the headphones automatically turn off.

Headphone fitting sensor

Set whether to detect when fitting the headphones.

Bluetooth blinking LED

The LEDs will blink when using the headphones.

Blinking		Not blinking
			The LEDs will not blink when using the headphones.

■Connection

Connection mode

Set whether to use a connection between the handset and the headphones that prioritizes sound quality or one that prioritizes connectivity.

Suppression of sound interruptions and delays

You can suppress sound interruptions and delays.

Multi-point

Set Multi-point on or off.
・LDAC cannot be used if you select On.

Off		On

■Operations/Sounds

Customizing the touch sensor

You can disable touch sensor operations, customize the touch sensor, etc.

■When setting whether to accept touch sensor operations

Sensor operations are disabled if you tap "OK".

■When customizing the touch sensor

		Double tap		Triple tap

‐In , tap either "Double tap" or "Triple tap" to select which you want to customize. -In , tap the operation you want to change.To return the customized settings to the original settings, tap "Return to default values".

Touch Sensor Noise Cancelling Settings

Set the modes to be switched with the touch sensor operations.

Ambient mode settings

Set whether to pause the music and enhance conversations or announcements even more while switched to Ambient Sound.

Optimizing noise cancellation

Set noise cancelling to the state that is optimum for you.

Level of background noise reduction

Set the strength of reduction of continuous noises from other party's end during a call. ・Select "Normal" if the environment of the other party is relatively quiet. If the other party is in a noisy situation (there are continuous noises from ventilation fans, etc.), select "Strong".

Voice assistant to use

Set the voice assistant to use. *The content displayed changes depending on the voice assistant supported by the connected headphones.

■Help

Website with help

Manual
This shows the web page with the operating instructions for the connected headphones.

How to use the app
This displays a website where you can view information about how to use this app.

Troubleshooting
This displays the website where you can view tips to solve problems.

Note
You can view notification details.

Firmware update information
This displays the website for firmware updates.

Hints for use

[1] Main multi functions button operations
You can check the main operations that use the Multi function button.

[2] Main touch sensor operations
You can check the main operations that use the touch sensor.

[3] Ambient Sound Control
You can view descriptions of Ambient Sound Control.

[4] Multi-point connections
You can view descriptions of multi-point connection.

Headphone information

You can view product information about the headphones.

・You can view the current version of the firmware used in the headphones in “Firmware version”. If the latest version of the firmware is detected, tap “Update available”.

About the application

You can view information about this app.

・You can display license information if you tap "User license information". ・You can display the privacy policy from the viewpoint of the protection of personal data if you tap "Privacy Policy".Read the policy and then tap "Accept" or "Do not accept". ・In "Share error data", set whether to upload to the log server the logs acquired by this app from the headphones and the logs kept by this app. *You need to accept the "Privacy Policy" for this to be turned on.・You can return to the condition immediately after installing this app if you tap "Initialize app". *Bluetooth pairing information is maintained.

Checking the firmware version and updating

You can use this app to update the firmware of the connected headphones.

・When there are multiple notifications, tap the Note button in the Home screen to display the notifications list screen, then tap "A headphones update is available."
When you tap "Update now", the firmware is transferred to the headphones and the update is made. Transfers may be interrupted or slowed down if music is played back or there is a call during the transfer. Start the transfer without operating the headphones.

Wait until the update completes, without operating the headphones or the app. ・After updating the firmware, the headphones automatically restart and reconnect with the handset.
Until the update completes, the app will not work properly even if you try to operate it, so do not try to operate the headphones or the app.


If “Firmware is up to date.” is displayed in “Setting” > "Headphone information”, the firmware has been update to the latest version.
Updating the firmware is also available with "Setting" > "Website with help" > "Note".