Grand Class SL-G700M2 Firmware

Update Information

Model Name SL-G700M2
Update Version Ver.1.00.02.00
Update Date Nov. 14, 2022

Improvement

Date/Version Description
Nov. 14, 2022 / Ver.1.00.02.00 Improvement of stability

About a Network Download method

Panasonic is constantly improving the unit's firmware to ensure that our customers are enjoying the latest technology. Please follow the steps to update the unit's firmware.

Downloading takes approx. 15 minutes.
Do not disconnect the AC mains lead or turn this unit to standby while updating.
Do not disconnect the USB flash memory while updating.
  • - The progress is displayed as "Updating %" while updating. ( stands for a number.)
Note
  • - During the update process, no other operations can be performed.
  • - If there are no updates, "Firmware is Up To Date" is displayed.(No need to update it.)
  • - Updating the firmware may reset the settings of this unit.

Update via Internet

Preparation
Connect this unit to the network.
- Make sure that the network is connected to the Internet.

Steps

  1. Press [NWP]
  2. Press [SETUP].
  3. Press [ up , down ] repeatedly to select "F/W Update" and then press [OK].
  4. Press [ up , down ] to select "Internet" and then press [OK].
  5. Press [ up , down ] to select "Yes" and then press [OK].
    • – The progress is displayed as "Updating %" while updating. ( stands for a number.)
    • – When the update has finished successfully, "Success" is displayed.
  6. Press [] to turn this unit off and on.
Note
  • - Downloading may take longer or may not work properly depending on the connection environment.

Update via USB flash memory

Preparation

  • - Download the latest firmware on the USB flash memory. For details, click here.
  • - FAT16 and FAT32 file systems are supported.

Steps

  1. Connect the USB flash memory with new firmware.
  2. Press [NWP]
  3. Press [SETUP].
  4. Press [ up , down ] repeatedly to select "F/W Update" and then press [OK].
  5. Press [ up , down ] to select "USB-A Front" and then press [OK].
  6. Press [ up , down ] to select "Yes" and then press [OK].
    • – The progress is displayed as "Updating %" while updating. ( stands for a number.)
    • – When the update has finished successfully, "Success" is displayed.
  7. Press [] to turn this unit off and on.
Note
  • - Downloading may take longer depending on the USB flash memory.

Checking the firmware version

  1. Press [NWP]
  2. Press [SETUP].
  3. Press [ up , down ] repeatedly to select "F/W Version" and then press [OK].

If you have any problems after installing the new firmware, please contact regional customer support.