Wi-Fi connection

(For Android™ devices)

1. Press and hold the digital camera's [Wi-Fi]* button, and select [New Connection] > [Remote Shooting & View]

2. Tap the setting icon for the smartphone, and turn the Wi-Fi function on

3. Start this application and tap [Wi-Fi] on the screen

  1. The SSID of the connected destination will be displayed.

4. Select the same SSID as the one displayed on the digital camera screen and enter the password

  1. When the connection is complete, an image of the digital camera will be displayed on the screen.

(For iOS devices)

1. Press and hold the digital camera's [Wi-Fi] button, and select [New Connection] > [Remote Shooting & View]

2. Tap the iOS device settings icon and turn the Wi-Fi function on

3. The SSID of the connected destination will be displayed on the screen, so select the same SSID as the one displayed on the digital camera screen and enter the password

4. Press the home button to exit the settings screen and start this application

  1. When the connection is complete, an image of the digital camera will be displayed on the screen.

* On this device, the [Wi-Fi] button will be [Fn 1].
The [Fn 1] button will be set for [Wi-Fi] by default at the time of purchase.
If the [Fn 1] button is reprogrammed for another function by the user, that function will engage instead.
To change settings, press the MENU button → [Custom] → [Fn Button Settings].

  1. When changing the connection method, change it on the digital camera.
  2. Since Wi-Fi connection drains battery quickly it is better to recharge before use when power is low.
  3. In some cases, a QR code message may be displayed, but it cannot be used.
  4. (For Android devices)
    If the Wi-Fi connection is immediately disconnected, please turn off the invalid setting for poor connection in the Wi-Fi settings menu. (However, this setting may not exist depending on the version you are using.)