Global Home Digital AV Support > TV > Download > Download Information of Life Design Models for Asia (Transmitter)

Download Information of Life Design Models for Asia (Transmitter)

Update Information

Model Number
Asia

LCD models

TH-43LF2NW      

OLED models

TH-65LW2NW      
Update Version Version 1.020
Update Date Dec. 17, 2024

Improvements
Date/Version Description
Dec. 17, 2024
Version 1.020
  1. Improve system stability.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your product.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto a USB flash memory.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your product.

Panasonic recommends that you update the firmware in your device if the firmware version indicated is older than the version being offered. Please check the current version
(Your product screen might have difference from the following examples, but the steps are the same.)

    Steps
  1. Turn the power ON
  2. Press [Menu] button , select [Main Menu] and press [OK] button to display Main Menu
  3. Select "Help" in Main menu

  4. Select "System information" in "Help Menu"

  5. Confirm "software Version"


    If the firmware version indicated is older than the version being offered, then please update the firmware.
    (Please update firmware, if [****] is smaller than [1020].)
    When the transmitter is not connected to the monitor, this displays "ffff".
    In that case, please confirm the version after making sure to be connected.

Use of software downloaded from this site requires agreement with the License Agreement.
Please review the contents of the License Agreement beforehand.

Please go to Step2 when agreeing to the agreement.

You can download source code for the programs licensed under the GNU LESSER
General Public License from the following button.

Source code download

Step 2 : Download an updated version of the firmware and decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:\Temp.
  2. Click the button to download and save the firmware in the folder you created in the above step.

  3. Double click the downloaded file *******.zip, then the extracted file will be named PANAEUSB.FRM

Depending on your browser settings the file may be downloaded automatically into your "DOWNLOAD" folder. If it's not automatically decompressed please use an archiver software to do that.