Connect a Mirroring Monitor

This function allows you to mirror and display camera's live view image on up to four smart devices.

[Operate the Sending Device]

  1. 1Select a[Mirroring] on the sending smart device.
  1. 2Select b[Sender's smart device].

  1. 31Network Setting (Sender)

    Turn on the Wi-Fi hotspot function.

    - On an iOS device
    From smartphone's [Settings], turn on [Wi-Fi] and [Personal Hotspot > Allow Others to Join].
    It is recommended to turn off “Maximize Compatibility”.

    - On an Android device
    From smartphone's [Settings > Network & internet], turn on [Wi-Fi] and [Hotspot & tethering > Wi-Fi hotspot].

    It is recommended to set “Speed & Compatibility” to 5 GHz or 6 GHz. If “Extended Compatibility” is displayed, please turn it off.

    *Depending on the Android device, “Wi-Fi tethering” may be indicated. Follow the model-specific instructions to operate the device.

  1. 42Prepare to Send

    After connecting the camera and smart device via USB cable, select c[Add Receiving Device].

    ( USB connection (steps 1 through 5))
  1. 5Continue operating the receiving smart device while keeping this screen displayed.

[Operate the Receiving Device]

  1. 1Select a[Mirroring] on the receiving smart device.
  1. 2Select d[Receiver's smart device].
  1. 31Network Setting (Receiver)

    From e[Settings App] on the receiver's smart device, turn on Wi-Fi and select the hotspot of the sender's device.

  2. 42Receiving Device Connection Check

    Select f[Next].

  1. 5gPlease make sure that the following smart device is added to the list shown on the sender's device.

[Operate the Sending Device]

  1. 1 Confirm that all receiving smart devices are added to the list on the sending device and select h[OK].

    *When you send an image to multiple devices, perform [Operate the Receiving Device] on other devices. After they are added to the list, select h[OK].

  1. 2Mirroring will start.

    When using the function for an external monitor, select it from i[External Monitor (USB)] on the TOP screen.
    When using the function for a video production workflow, select it from j[Record (USB)] of the project.

Add a receiving device

A monitor can be added by selecting k[Add Receiving Device] on the sending smart device and following the steps in [Operate the Receiving Device].
Receiving devices can be added even after the mirroring has started.

Exit Mirroring

Select l[Exit Mirroring] on the sending smart device.

Image Qlty. Prior.

mYou can display the mirrored image with high image quality. It is recommended to turn this on when you have a good communication environment.

Director Monitor

nYou can check shot list, playback and rate videos from mirroring monitor.
This is useful for team video production, such as when there is a director and a camera operator.
When Director Monitor is turned on, swiping is not available on a device connected to the camera via USB. You can switch between Record screen, Playback screen, and Shot List screen from a director monitor.

*Depending on the type of SIM card, this setting may not be available.
The connection may become less stable as the number of receiving smart devices increases.