Added feature with an upgrade software key DMW-SFU3A
- An "Activation" function has been added to enable the extended feature using the optional upgrade software key, DMW-SFU3A sold separately.
The following function is added by activation.
· [ARRI LogC3] is added to [Photo Style].
Support for DMW-XLR2
- XLR microphone adaptor, DMW-XLR2 has now been supported.
* 32bit float recording function is not available.
Operational stability when using in some storage devices has been improved.
Oct. 24, 2023
Ver.2.4
Expanded compatibility with DJI Gimbal
- Now supports "DJI LiDAR AF" in the combination of DJI gimbal "DJI RS 3Pro" and "DJI LiDAR Range Finder (RS)".
* All functions may not be available depending on the situation.
For details, please check the Panasonic product page and DJI's official page.
· Panasonic product page
· DJI's official page
Others
- There were cases where the camera froze when shooting in Apple ProRes recording modes depending on the settings. This phenomenon has been fixed.
- Improved operational stability.
Jul. 11, 2023
Ver.2.3
RAW video output over HDMI to Blackmagic Design external recorder
- [5.7K] / [C4K] / [Anamorphic (4:3) 5.8K] / [Anamorphic (4:3) 4.4K] 12-bit RAW video data can be output over HDMI to Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR, to be recorded as Blackmagic RAW.
* DaVinci Resolve or DaVinci Resolve Studio is required to play back and DaVinci Resolve Studio to edit Blackmagic RAW data.
* Please refer to the Blackmagic Design website for the information on the corresponding firmware version of Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR.
* All functions may not be available depending on the situation.
* When recording in C4K 120p/100p or 5.7K 60p/50p, constant bitrate 5:1 or less is recommended for SSD recording and 8:1 or less for SD card recording.
4K120p/100p video output over HDMI
- When video quality is set to C4K 120p/100p or 4K 120p/100p, video output to an external device over HDMI at C4K 120p/100p or 4K 120p/100p is possible.
- [Power Save Live View] function has been added.
Improved external SSD recording function
The following format can be selected to record to an external SSD when Panasonic AC adaptor (DMW-AC10, optional) and DC Coupler (DMW-DCC17, optional) is connected.
- [Rec Quality] with a high frame rate video exceeding a recording frame rate of 60.00p.
- [Variable Frame Rate] exceeding a frame rate of 60fps.
- [5.7K] / [C4K] / [Anamorphic (4:3) 5.8K] / [Anamorphic (4:3) 4.4K] 12-bit RAW video data can be output over HDMI to ATOMOS NINJA V and NINJA V+ devices, to be recorded as Apple Pro Res RAW.
* All functions may not be available depending on the situation.
* NINJA V+ supports all RAW video data. NINJA V does not support some RAW video data.
* Software that supports Apple ProRes RAW is required to edit RAW video recorded with NINJA V/V+.
There were cases where magenta or green cast was seen on the live view image during photo shooting/video recording. This bug has been fixed.
When recording video in [5.7K/5.8K] with a wide-angle lens and the [E-Stabilization(Video)] is set to ON, there were cases where particular part of the image frames were vertically shifted throughout the footage depending on the focal length. This bug has been fixed.
Mar. 16, 2022
Ver.1.1
When a RAW image shot in High Resolution mode was developed using RAW development software, there were cases where false color occurred in the developed image. This issue has been resolved.
Download
Click here to the procedure for update.