Direct Drive Turntable System / SL-1300G

GENERAL QUESTIONS

No power.

  • Is the AC mains lead plugged in? Plug the mains lead in firmly.

There is power but no sound. Sound is weak.

  • Are connections to the amplifier/receiver's PHONO terminals correct? Connect the PHONO cables to the amplifier's PHONO terminals.

Left and right sounds are reversed.

  • Are the stereo connection cable connections to the amplifier or receiver reversed? Double check all connections.
  • Are connections of the head shell's lead wires to the cartridge terminals correct? Double check all connections.

Humming is heard during play.

  • Are there other appliances or their AC mains lead near the stereo connection cable? Separate the appliances and their AC mains lead from this unit.
  • Is the earth lead connected? Make sure the earth lead is correctly connected.

The indicator on the speed select button [33] or [45] blinks.

  • Perform the following operations when the indicator on the speed select button [33] or [45] blinks. The symptom may be improved.
  1. Press [ ] to OFF.
  2. Pull out the power plug, wait for three seconds or more, and then insert the plug again.
  3. Press [ ] to turn the unit on and press [START-STOP] to rotate the turntable.
  • If the indicator on the speed select button blinks again, check which one is blinking and contact our service representative.