Pair the earphones with a subsequent Bluetooth® device without the app
You can pair up to 10 Bluetooth® devices with the earphones.
You can pair by using the touch sensors on the earphones.
(Example)
•Using the earphones with a smartphone as the first device and a computer as the second device
Important:
•When pairing, keep the Bluetooth® device and earphones close together. (Within about 1 m)
•Depending on the connected Bluetooth® device, a loud sound may be output during playback. Check the volume setting of the Bluetooth® device before starting playback.
1.Put both earphones (L and R) into the charging cradle and charge.
2.Take out both earphones (L and R) from the charging cradle and wear them.
3.Touch and hold both touch sensors (L and R) at the same time until you hear the pairing sound.
•A message about starting to pair plays, and a melody repeats.
To listen to the melody, click
Here.
4.Turn on Bluetooth® in the subsequent Bluetooth® device.
5.From the Bluetooth® menu in the subsequent Bluetooth® device, select the earphones.
•If you are asked to input a passkey, input the earphone passkey “0000” (four zeros).
•For details about setting up Bluetooth®, please refer to the manual of the Bluetooth® device.
Note:
•If you pair a device when the maximum number of paired Bluetooth® devices is exceeded, previously paired devices will be overwritten. To use overwritten devices again, pair them again.
•Pairing a subsequent device is easier if you turn off Bluetooth® in the first device.
•The earphones will cancel pairing mode and go into connection standby mode if the device is not connected within 5 minutes. Pair again.
•The unit remembers the last connected device. The unit may connect automatically after it is turned on.
•The unit can connect to up to 3 Bluetooth® devices at the same time.