About menu screen
Tap
at bottom of screen to display menu screen below and set available options*1:
| [Set connect. dest.] | |
|---|---|
| Changes the Wi-Fi connection. | |
| [Record Setup] | |
[Normal shooting mode] Sets video recording mode. The larger the value, the higher video quality, and the larger file size. | |
[Slow motion mode] Changes to slow-motion video recording mode. | |
[Wind noise reduction] Reduces wind noise capture. | |
[Interval rec mode] Captures still pictures at a set interval. Available interval settings are as follows.[60 Seconds] [30 Seconds] [10 Seconds] [5 Seconds] [3 Seconds] [OFF] | |
[Self Timer] Capture still pictures using a timer. Timer settings are as follows.[10 Seconds] [2 Seconds] [OFF] | |
[Level Shot] Automatically corrects image inclination to horizontal. | |
[Image stabilization] Reduces wearable camera blur. | |
[White Balance] When the tint is unnatural due to such factors as the light source, tap [Preset] and select the most suitable mode. | |
[Backlight Compens.] Brightens the screen image to prevent it from darkening when there is a light source behind the subject. | |
[Color Night Rec] You can capture images in colors that are enhanced and brightened even in dark places. | |
[Shooting guidelines] You can check whether or not an image is horizontal. | |
[Shtr Sound] A sound is made when a still picture is captured. ([High] [Low] [OFF]) | |
| [Live Control Settings] | |
[Self shot mode] When taking a picture of yourself, the image on the screen of your smartphone / tablet will be flipped (a mirror image).
| |
| [Playback settings] | |
[“Picture Share” settings] Sets the destination by dragging and dropping icons on the screen to tabs on the screen edges. | |
[Size:Copy from Camera] Sets the size of images received from the wearable camera. | |
[Size:Upl. to Web] Sets the size of images sent to the Web. | |
[Erase Upload loc.] If the sent image contains any location information, the information will be deleted. | |
[LUMIX CLUB settings] Switching on [Start LUMIX CLUB function use] lets you register to a destination web service. You need to log in with your ID. Tap [Sign up] and follow registration instructions to get a login ID. | |
| [Application function] | |
[Network name] DLNA names displayed on other devices can be changed. | |
[Use Location Logging]* * This function cannot be used on the HX-A100. | |
| [Camera function] | |
| You can turn off the power on the wearable camera. | |
| [Camera Wi-Fi setup] | |
[Live mode settings] Configures access point and other options when using the wearable camera's Live broadcast mode. | |
[AP mode setup] Sets the Wi-Fi access point. | |
[Camera SSID settings] Changes wearable camera SSID/Password, etc. | |
| [Camera setup] | |
[Alert Sound] A sound will notify you when you start or stop capturing, turn power on/off, a recording or Wi-Fi error occurs, etc. ([High] [Low] [OFF]) | |
[Economy] If no operations are performed for about 5 minutes, the wearable camera power will be automatically shut off to prevent battery consumption. | |
[Initial Set] Restores wearable camera's factory settings. | |
[Format] Deletes all data inside wearable camera microSD card. Please save important data to a computer or other device. | |
[Date & time] Sync time of smartphone / tablet with date & time of wearable camera. | |
[Number Reset] Sets file number of next video or still picture captured to 0001. | |
[Device info. display] Wearable camera firmware (software) version is displayed. | |
| [Help] | |
| [Help] shows. | |
| [Terms of use] | |
| [Terms of use] are displayed. | |
*1 The displayed contents differ depending on whether the device is connected to Wi-Fi or not. It also differs if the device has been connected to Wi-Fi in the past.
Return to [Help]