Menu
Tap
to display menu screen below and set available options*1:
| [Set connect. dest.] | |
|---|---|
| Changes the Wi-Fi connection. | |
| [Record Setup] | |
[Recording Mode] The following is a list of recording modes that can be configured.
Sets video recording mode. The larger the value, the higher video quality, and the larger file size.
Changes to slow-motion video recording mode.
If you record for over an hour, only the final hour (approximately) of content will be saved. | |
[Pixels / Frame rate] Change resolution of movie to be recorded. The configurable pixels/frame rate changes based on the selected recording mode. | |
[Delay-Start Rec] Recording will begin approximately three seconds after the start/pause recording button is tapped. | |
[Microphone] You can record without sound when the settings are turned off. | |
[Wind noise reduction] Reduces wind noise capture. | |
[Interval rec mode] Captures still pictures at a set interval. Available interval settings are as follows.[60 Seconds] [30 Seconds] [10 Seconds] [5 Seconds] [OFF] | |
[White Balance] Adjust the white light to closely match the light source. | |
[Backlight Compens.] Correct the subject so that it is not silhouetted when lit from behind. | |
[Shooting guidelines] You can check whether or not an image is horizontal. | |
[Shtr Sound] A sound is made when a still picture is captured. ([ON] [OFF]) | |
| [Live Control Settings] | |
[Self shot mode] When taking a picture of yourself, the image on the screen of your smartphone / tablet will be flipped (a mirror image).
| |
[Full Screen Preview] Automatically adjust screen size to full screen when the smartphone / tablet is orientated horizontally. | |
| [Playback settings] | |
[“Picture Share” settings] Sets the destination by dragging and dropping icons on the screen to tabs on the screen edges. | |
[Size:Copy from Camera] Sets the size of images received from the wearable camera. | |
[Size:Upl. to Web] Sets the size of images sent to the Web. | |
[Erase Upload loc.] If the sent image contains any location information, the information will be deleted. | |
[LUMIX CLUB settings] Switching on [Start LUMIX CLUB function use] lets you register to a destination web service. You need to log in with your ID. Tap [Sign up] and follow registration instructions to get a login ID. | |
|
[Select video player]*2 You can select any video player that is installed on your smartphone / tablet. | |
| [Camera function] | |
[Camera power off] You can turn off the power on the wearable camera. | |
| [Camera Wi-Fi setup] | |
[Camera SSID settings] Change wearable camera SSID/Password. | |
| [Camera setup] | |
[Alert Sound] Configure operation and notification sounds for wearable camera. ([ON] [OFF]) | |
[Economy] Shuts off automatically when the wearable camera is idle for approximately five minutes to conserve battery. | |
[Initial Set] Restores wearable camera's factory settings. | |
[Format] Deletes all data inside wearable camera microSD card. Please save important data to a computer or other device. | |
[Clock Set] Sync date and time of wearable camera with smartphone / tablet. | |
[Number Reset] Sets file number of next video or still picture captured to 0001.Folder number is updated and file number will start from 0001. | |
[Device info. display] Wearable camera firmware (software) version is displayed. | |
[Select USB mode] When the Wearable Camera is connected to a computer it can be set to be used as a card reader or as a web camera.(Computer / Web Camera) Please check Operating Instruction for details. | |
| [Help] | |
| [Help] shows. | |
| [Terms of use] | |
| [Terms of use] are displayed. | |
*1 The displayed contents differ depending on whether the device is connected to Wi-Fi or not. It also differs if the device has been connected to Wi-Fi in the past.
*2 Compatible device: Android devices
Return to [Help]