Notice of the end of the Home Monitor function support
Using Home Monitor function

You can check on your home while away using a smartphone / tablet.

  1. Please refer to the video camera operating instructions and set Home Monitor of the Wi-Fi® function.
  2. Please turn Wi-Fi setting of the smartphone / tablet off.
  3. If you are not using any mobile phone connections, you cannot use this function.
  4. Depending on your smartphone or internet contract details, you may incur high data transmission fees or may reach data transmission limit, so please be sure to confirm your contract details.

1. Start this application and tapiconat bottom of screen

2. Tap [Application function] > [Home Monitor]

3. Turn [Use Home Monitor] on

4. Tap [Set connect. dest.] and set

  1. If you are setting for the first time, please enter the [Device ID] and [Password] for the video camera.

5. Tap [Start Home Monitor]

Home Monitor Mode screen is displayed.

  1. It may take a few minutes to display the image.
  2. You can tapiconto record video. Tap again to stop recording video.
  3. You can tapiconto talk.
    You can talk for up to 10 seconds. Time left is displayed on the screen.
    You can tap again to talk one more time.
    To end early, tap the [Exit] button.
  4. Tapiconto record a still picture.
  5. You can perform zoom functions with the following slide bar.
    icon
    (During vertical display)

(For iOS devices)

Please tapiconon the screen.

(For Android™ devices)

Please tap the Return button on the device in use.

You can tapiconon bottom of Home Monitor Mode screen to display Home Monitor settings options* on the menu, and change the following settings.

* Not displayed outside of Home Monitor Mode.

[Moving object detection] Set the time it takes for the video camera to detect the next moving object after already detecting one. It will not detect within the allotted time even if there is a moving object present. The setting time is as below.

[OFF] [10 Minutes] [30 Minutes] [60 Minutes]

[Static object detection] Set the time it takes to detect the subject as a static object when there is no change. The setting time is as below.

[OFF] [3 Hours] [6 Hours] [12 Hours]

[Detection area] Wide: Perform detection with the video camera's widest possible detection area.
Narrow: Perform detection only in the center of video camera's detection area.
[Auto recording] On: Perform auto recording under the detection setting conditions. (Record time is 30 seconds)
Off: Will not perform auto recording.
[Remote Voice Level] High: Set speaker volume to high.
Low: Set speaker volume to low.
[Color Night Rec] On: Turn Color Night Rec on.
Off: Turn Color Night Rec off.
  1. You cannot use it while the smartphone / tablet is connected to Wi-Fi.
  2. While in Home Monitor Mode, it is not possible to switch to the playback screen even if you tapicon.
  3. Image quality for videos displayed on smartphone / tablet will be grainy.
  4. Images and sound will be played back on the screen with a delay from the actual source. When recording video, it is recorded with a delay from the image displayed on the screen.

(For iOS devices)

  1. While in Home Monitor mode, please do not press the Home button. Next time it starts up, there is a chance that you will no longer be able to transmit in Home Monitor mode. If you want to exit Home Monitor mode, you must tapicon. If you become unable to transmit in Home Monitor mode, first force close the application, then restart it.