Wi-Fi connection
Begins Wi-Fi connection setup* in order to use this application's function.
* Available Wi-Fi features differ depending on the type of Wi-Fi connection.
For more content details, connection problems or other ways to connect other than the method below, please refer to the digital camera's user's manual.
For Android™ devices
- Read a QR code to connect*
* In the event that the smartphone cannot clear read the QR code, please use a different connection process.
- Press and hold the [Wi-Fi] button on the camera
- Start “Image App” on the smartphone
- Select [QR code] on the “Image App” screen
- Read the QR code displayed on the camera in step 1 with “Image App” on the smartphone
- Use the NFC function to connect*
- If
does not appear on the smartphone, the NFC function is disabled. Refer to the instruction manual of your smartphone and follow the steps indicated to enable the NFC function.
- Compatible device: Android (OS 2.3.3 or later) device that support NFC (Some devices may not be compatible).
- Start “Image App” on your smartphone
- While
is displayed on the connection screen of “Image App”, hold the smartphone close to the camera
- When a message confirming connection to the smartphone is displayed on the camera, select [Yes] and press [MENU/SET]
- Hold the smartphone close to the camera again
- Steps 3 and 4 are not necessary when reconnecting.
- You can also connect by manually entering the password
- Press and hold the [Wi-Fi] button on the camera
- Start “Image App” on the smartphone
- Select [Wi-Fi] on the “Image App” screen
- Select the SSID displayed on the camera in step 1
- Enter the password displayed on the camera in step 1 (First time connection only)
- It is not necessary to enter the password when reconnecting.
For iOS devices
- Use a QR code to make settings easily*
* In the event that the smartphone cannot clear read the QR code, please use a different connection process.
- Press and hold the [Wi-Fi] button on the camera
- Start “Image App” on the smartphone
- Select [QR code] > [OK]
- Read the QR code displayed on the camera in step 1 with “Image App” on the smartphone
- Install the IMAGE APP profile
Select [Install], then select [Install Now] > [Done]. The message is displayed in the Web browser.
- If a passcode is required to unlock the smartphone, you will have to input the passcode.
- Press the home button to close the Web browser
- Select [Wi-Fi] under [Settings] on the smartphone
- Select the SSID displayed on the camera in step 1
- Return to the home screen and start “Image App”
- Steps 2 to 6 are not necessary when reconnecting.
- You can also connect by manually entering the password
- Press and hold the [Wi-Fi] button on the camera
- Select [Wi-Fi] under [Settings] on the smartphone
- Select the SSID displayed on the camera in step 1
- Enter the password displayed on the camera in step 1 (First time connection only)
- Return to the home screen and start “Image App”
- It is not necessary to enter the password when reconnecting.
- Notes
- Since Wi-Fi connection drains battery quickly it is better to recharge before use when power is low.
- If the Wi-Fi connection is immediately disconnected on Android devices, please turn off the invalid setting for poor connection in the Wi-Fi settings menu. However, this setting may not exist depending on the version you are using.