Wi-Fi® connection
Wi-Fi connects automatically when pairing the camera with Bluetooth.
Please refer to the digital camera operating instructions when making a Wi-Fi connection without using Bluetooth.
Bluetooth® connection (Pairing)*
Cloud backup and Wi-Fi connection is automatically performed by connecting your camera via Bluetooth.
| * | Compatible devices | : | Android 5.0 or later, Bluetooth 4.0 or later installed (Except for some devices that do not support Bluetooth low energy) |
|---|---|---|---|
| : | iOS 8.0 or later (Except iPad 2) |
Preparation
- Please put the camera on pairing standby mode
- See digital camera operating instructions for details.
Operation
- Tap
> 
- Activate [Bluetooth]
- Select the device name displayed on the camera’s screen from the [Camera enable to be registered] list
- Bluetooth connection between the camera and the smartphone will be made.
(For Android devices) Select [Connection] to connect to Wi-Fi.
- Bluetooth connection between the camera and the smartphone will be made.
The process is complete by following the above for Android devices. For iOS devices*, please follow the steps below.
- If [Wi-Fi Password] is set to [OFF] on the camera, select [Wi-Fi Setup].
(At the time of purchase, [Wi-Fi Password] is set to [OFF]) - If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile.
- Install the profile
- Select [Install], then select [Install Now] > [Done]. The message is displayed in the Web browser.
- Press the home button to close the Web browser
- Turn on the Wi-Fi function in the smartphone’s setting menu
- On the Wi-Fi setting screen, select the SSID (the device name selected in step 3) displayed on the camera
- Press the home button, and select “Image App” to display “Image App”
* If you need to change the connected device on the Wi-Fi setup screen, follow the on-screen message to change the setting.
Connecting for the second and subsequent times
- Tap >
- Select [Camera registered]
- [
] is displayed on the camera recording screen during a Bluetooth connection. When the Bluetooth function is enabled, but a connection is not established, [] appears translucent. - Once you set up pairing, you can connect with just your smartphone next time.
(It is necessary to turn the camera's [Bluetooth] on.) - Even if you set up pairing with more than one smartphone, you can only connect to one smartphone at a time.
Return to [Help]