Global Home Digital AV Support > TV > Download > Firmware Update Procedure for TV

Firmware Update Procedure for TV

Step 3. Copy the firmware file onto a USB Flash Memory.

Preparation of the USB Flash Memory

Please prepare a formatted USB Flash Memory with free space more than the self-extracted file. Please refer your instruction book for mode details.
When formatting the USB Flash Memory, all data, including protected data, will be erased and can not be recovered. Please make sure to back up your important data so you don't loose it.

Insert your formatted USB Flash Memory to your USB terminal of your PC.

Copy the file into the Root directory (*1) of the USB Flash Memory.

(*1) Root directory = The first or top-most directory in the hierarchy.

Step 4. Install the firmware update.

  1. Turn on the TV.
  2. Insert the USB Flash Memory prepared in STEP 3 into your USB terminal of your TV.
       
     

  3. 3. Select "Yes" and press OK button.
       
     

  4. Please wait until download is completed.
  5. If update is finished, the following screen is displayed.
    (1) Remove the USB Flash Memory from TV
    (2) Turn the power OFF
    (3) Turn the power ON
       
     
       
  6. Confirm the new version of the system software. Refer to Step1.
Note : If you fail to update, please turn off and on more than 3 times and try again.
 

If you have any problems after installing the new firmware, please contact the Global Service Center Network.