Global Home Digital AV Support > TV > Download > Firmware Update Procedure for TV

Firmware Update Procedure for TV

Firmware Update Procedures for Europe and CIS

Step 3. Copy the firmware file onto an SD Memory Card.

Preparation of the SD Memory Card

32MB or more must be free on the SD Memory Card and use an SD Memory Card which has already been formatted. Please refer your instruction book for mode details.
When formatting the SD Memory Card, all data, including protected data, will be erased and can not be recovered. Please make sure to back up your important data so you don't loose it.

Insert your formatted SD Memory card to your SD slot of your PC.
If your PC does not have an SD slot, use an external USB SD Reader/Writer device.

Copy the file into the Root directory (*1) of the SD Memory Card.
(*1) Root directory = The first or top-most directory in the hierarchy.

Step 4. Install the firmware update.

  1. Turn on the TV.
  2. Insert the SD Memory Card prepared in STEP 3 into your SD slot of your TV.

  4. Press OK button

  5. Select "Yes" and press OK button.

  6. Please wait until download is completed.

  7. If update is finished, the following screen is displayed.
    (1) Remove the SD Memory Card from TV.
    (2) Turn off the main power of the TV.
    (3) Turn on the main power of the TV.

  8. Wait max 3 minutes until massage disappears.

  9. Wait more about 10 Seconds with black out screen.

  10. Download finished if screen appear.

    Software successfully updated.
    However, the message does not appear.

  11. Confirm the new version of the system software. Refer to Step1.
    Note : If you fail to update, please turn off and on more than 3 times and try again.

If you have any problems after installing the new firmware, please contact the Global Service Center Network.