Head on this page.

Global Home Support > Digital AV > TV > Download > Download Information of TV for Europe and CIS

Download Information of TV for Europe and CIS

Update Information

Model Number
PDP model    
    TX-P42VT30Y TX-P55VT30Y TX-PR50VT30
    TX-P50VT30Y TX-P65VT30Y TX-PR65VT30

Update Version Ver. 1.707
Update File Name / Size
  • P112_1707.zip / 53,956,559 bytes
Update Date Jul. 19, 2012

Improvements
Date/Version Description
Jul. 19, 2012
Ver. 1.707
  1. Improvemet of Viere Connect functions.
Jun. 14, 2012
Ver. 1.706
  1. Improvement of Skype camera compatibility.
Oct. 18, 2011
Ver. 1.704
  1. Pay service introduction for TV Connect Market.
Sep. 15, 2011
Ver. 1.703
  1. Improvement for Media player compatibility.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your TV.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto an SD Memory Card.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your TV.

Panasonic recommends that you update the firmware in your TV if either of the following conditions exists:Gf the firmware version indicated is older than the version being offered, please update firmware.
It will only be necessary to update the software if the version that you have in your TV is older than the version being offered.

    Steps
    (The following display images may be slightly different from your TV, but the firmware update procedures are the same.)
  1. Turn the power ON
    Press [Menu] button to display Main Menu
    Select "Setup" in Main menu

  2. Select "System Menu" in "Setup Menu"
       
    Select "System Information" in "System Menu"

  3. Confirm "software Version"

    		  

    If the firmware version indicated is older than the version being offered, please update firmware.
    (Please update firmware, if [****] is smaller than [1707].)

Step 2. Download an updated version of the firmware and double click the downloaded file to decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

  2. Download

If the version of the firmware installed in your TV is lower than the newest version of the firmware available, please download the newest version of the firmware.
Use of software downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehand.

Please push the button when agreeing to the agreement.

You can download source code for the programs licensed under the GNU LESSER
General Public License from the following button.


Download and save the firmware in the folder you created in the above step.
Please confirm the file size that downloaded, and compare the file size of the top mentioned above with the file size.
If they were the same, a normal download was completed.

3.Double click the downloaded file

You may see following screen after you have double clicked the downloaded file, please ignore it and just click "Run" button and move to the next step.

 

< Fig.1 Security Warning >
 
 

4.The self-extracted file SDDL.SEC will appear.