Global Home Digital AV Support > TV > Download > Download Information of TV for Europe

Download Information of TV for Europe

Update Information

Model Number
Europe

OLED models

TV-77Z93AEG TV-65Z95AEG TV-55Z95AEG TV-65Z90AEG TV-55Z90AEG
TV-48Z90AEG TV-42Z90AEG TV-65Z85AEG TV-55Z85AEG TV-77Z93AEK
TV-65Z95AEK TV-55Z95AEK TV-65Z85AEK    
TV-65Z90AE6 TV-65Z90AE7 TV-65Z90AE8 TV-65Z90AE9 TV-65Z90AEK
TV-55Z90AE6 TV-55Z90AE7 TV-55Z90AE8 TV-55Z90AE9  
TV-48Z90AE6 TV-48Z90AE7 TV-48Z90AE8 TV-48Z90AE9  
TV-42Z90AE6 TV-42Z90AE7 TV-42Z90AE8 TV-42Z90AE9  

LCD models

TV-65W90AEG TV-55W90AEG TV-50W90AEG TV-43W90AEG  
TV-65W93AE6 TV-65W93AE7 TV-65W93AE8 TV-65W93AE9  
TV-55W93AE6 TV-55W93AE7 TV-55W93AE8 TV-55W93AE9  
TV-50W93AE6 TV-50W93AE7 TV-50W93AE8 TV-50W93AE9  
TV-43W93AE6 TV-43W93AE7 TV-43W93AE8 TV-43W93AE9  
TV-75W95AEG TV-65W95AEG TV-55W95AEG    
Update Version Version RS8112/2463
Update Date Nov. 5, 2024

Improvements
Date/Version Description
Nov. 5, 2024
Version RS8112/2463
  1. Improve system stability
Oct. 1, 2024
Version RS8112/2442
  1. Improve system stability
Aug. 8, 2024
Version RS8112/2399
  1. Improve system stability
Jun. 20, 2024
Version RS8112/2363
  1. Addition/update some features
    Added main no-internet connection features
    - Recorded program on USB-HDD
    - Multi-view
    - TV>IP
  2. Improve system stability

Firmware Update Procedures via the Internet (Network connection is required, but Amazon account is not required.)

Perform steps 1 through 2 listed below.
Step 1: Check the current version of Software used by your TV.
Step 2: Download an updated version of the Software and install it via the Internet.

Note : Firmware update is supported via the internet only.

  • To update, an Internet connection is required, but Amazon account is not required.

Step 1. Check the current version of firmware used by your TV.
Panasonic recommends that you update the Software in your TV
if the Software version indicated is older than the version being offered.
Please check the current version of Software in following procedure.
(Your TV screen might have difference from the following examples, but the steps are the same.)

    Steps
  1. Press the Home button on your remote control and select “Settings” (on the screen).
  2. Select "Device and Software" and press the "OK" button.
  3. Select “About" and press the "OK" button.
  4. Select "Check for updates" and press the "OK" button.
    - As shown in the image on the following, you will see that
    "Your Fire TV is up to date."

    (Reference)
    You can also check the software for "Your TV" by following the steps below.
    ・Checking Method(A)
    1. Press the Home button on the remote control and select “Settings” (on the screen).
    2. Select "Device and Software" and check the current version.

  5. ・Checking Method(B)
    1. Press the Home button on the remote control and “Settings”(on the screen).
    2. Select "Device and Software."
    3. Select "About," then select "Panasonic System Information."

Step 2: Download an updated version of the Software and install it via the internet.

Note: Your TV may reboot during the update, which takes approximately a few minutes to complete.
If the software is downloaded while connected to the Internet,
manually install and update using the following steps.
- The update to the new version of the software may be completed while the power is turned off.

  1. Press the Home button on your remote control and “Settings” (on the screen).
  2. Select "Device and Software" and press the "OK" button.
  3. Select “About" and press the "OK" button.
  4. Download the software to “Your TV."
    ① Select "Check for updates" and press the "OK" button.
    * "Downloading" will be displayed while the software is being downloaded.
    ② Once the download is complete, you can select "Install".
    * As the download uses an Internet connection, download times will depend on your environment.
  5. Install the software on “Your TV."
    ① Select "Install updates" and press the "OK" button.
    * "Installing" will be displayed while the software is being installed.
    * Installation takes about 10 minutes.
    ② After the installation is complete, follow the instructions on the screen.
    * A restart may be required.
  6. Check the software update status.
    ① Press the Home button on your remote control and “Settings” (on the screen).
    ② Select "Device and Software" and press the "OK" button.
    ③ Select "About" and press the "OK" button.
    ④ Select "Check for updates" and press the "OK" button.
    As shown in the image on the following, the software update process is complete when the message "Your Fire TV is up to date.“ is displayed.
  7. (Note)
    An additional software update may be required.
    If the message "An update is available" is displayed as shown in the image on the following, please repeat steps (5) and (6) above.