Global Home Digital AV Support > TV > Download > Firmware Update Procedure for TV

Firmware Update Procedure for TV

Firmware Update Procedures for UK and Ireland/ Europe/ CIS

Step 3. Copy the firmware file onto an USB flash memory.

Preparation of the USB flash memory

Please prepare a formatted USB flash memory with more free space available than the self-extracted file. Please refer to your instruction book for more details.
When formatting the USB flash memory, all data (including protected data) will be erased and can not be recovered. Please ensure you back up your important data so you don't lose it.

Insert your formatted USB flash memory to your USB slot of your PC.

Copy the file into the Root directory (*1) of the USB flash memory.
(*1) Root directory = The first or top-most directory in the hierarchy.

Step 4. Install the firmware update.

  1. Turn on the TV.
  2. Insert the USB flash memory prepared in STEP 3 into the USB terminal of your TV.

  4. Press OK button.

  5. Select "Yes" and press OK button.

  6. Please wait until download is completed.

  7. When the update is finished, the following screen will display.
    (1) Remove the USB flash memory from TV.
    (2) Turn the TV off at the main power switch.
    (3) Turn TV back on at the main power switch.

  8. Wait until the message disappears (max 3 minutes).

  9. A black screen will appear for around 10 Seconds.

  10. When the download is finished the TV should start as usual.

  11. Confirm the new version of the system software. Refer to Step1.
  12. Note : If the update fails, please switch the set on and off at least 3 times and try again.

If you have any problems after installing the new firmware, please contact the Global Service Center Network.