Global Home Support > Digital AV > TV > Download > Firmware Update Procedure for TV

Firmware Update Procedure for TV

Firmware Update Procedures for UK and Ireland

Step 3. Copy the firmware file onto an USB flash memory.

Preparation of the USB flash memory

Please prepare a formatted USB flash memory with more free space available than the self-extracted file. Please refer to your instruction book for more details.
When formatting the USB flash memory, all data (including protected data) will be erased and can not be recovered. Please ensure you back up your important data so you don't lose it.


Insert your formatted USB flash memory to your USB slot of your PC.

Copy the file into the Root directory (*1) of the USB flash memory.
(*1) Root directory = The first or top-most directory in the hierarchy.

Don't unplug AC or take off USB Flash Memory during following process.

Step 4. Install the firmware update.

  1. Turn on the TV.
  2. Insert the USB flash memory prepared in STEP 3 into the USB terminal of your TV.
  3.      
       

  4. Select "Yes" and press OK button.
         
       

  5. Please wait until download is completed.
  6. If update is finished, the following screen is displayed.

    (1) Turn the power OFF.
    (2) Remove USB flash memory.
    (3) Turn the power ON.
         
       

  7. Confirm the new version of the system software. Refer to Step1.
  8. Note : If you fail to update, please turn off and on more than 3 times and try again.

If you have any problems after installing the new firmware, please contact the Global Service Center Network.