Global Home Support > Digital AV > TV > Download > Download Information of TV for Oceania

Download Information of TV for Oceania

Update Information

Model Number
Oceania

LCD models

TH-65JX700Z TH-58JX700Z TH-50JX700Z TH-40JX700Z
Update Version Version 4.025
Update Date Mar. 15, 2021

Improvements
Date/Version Description
Mar. 15, 2021
Ver.4.025
  1. Update security patch (Jan. 5, 2021)
  2. Improve system stability.

Firmware Update Procedures via the Internet (Network connection is required)

Perform steps 1 through 2 listed below.
Step 1: Check the current version of firmware used by your TV.
Step 2: Download an updated version of the firmware and install it via the Internet.
Step 3: Confirm "Android security patch level" (if you need).

Note : Firmware update is supported via the internet only.

Step 1. Check the current version of firmware used by your TV.
Panasonic recommends that you update the firmware in your TV
if the firmware version indicated is older than the version being offered.
Please check the current version of firmware in following procedure.
(Your TV screen might have difference from the following examples, but the steps are the same.)

    Steps
  1. Turn the power ON
  2. Press [Menu] button to display Main Menu
  3. Select "Settings" in Main menu
  4. Select "Device Preference" in "Settings"
  5. Select "About" in "Device Preferences"
  6. Select "Service Information" in "About"
  7. Confirm "software Version"
  8. If the firmware version indicated is same as the version being offered, then finished.
    If the firmware version indicated is older than the version being offered, then please update the firmware according to the following procedure step2.
    (Please update firmware, if [*.***] is smaller than [4.025].)

NOTE: Notification message is displayed like below when system update is already available.
Some of notifications can be selected by remote OK button and
can go directly to [5. Press "Restart now"] of the next "Step 2" below.

Step 2. Download an updated version of the firmware and install it via the internet.

Note: During update, your TV will automatically reboot a few times and it will take about 10 minutes to complete.

  1. Press [BACK] button in "Service Information" to return to "About".
  2. Select "System update" in "About".
  3. Press OK button.
  4. Below message is displayed if update is available.
  5. Press "Restart now".
  6. System update is started.
  7. TV reboots once, then Panasonic Logo is displayed.
  8. Start Installing.
  9. When installing is complete, TV reboots again, then the Panasonic logo is displayed again.
  10. Then the Android logo is displayed.
  11. Confirm the new version of the system software. Refer to Step1.

Note : If the update fails, please check the network equipment and network environment.

Step 3: If you would like to confirm Security patch level in Menu, please perform steps in following procedure.

  1. Press [Menu] button to display Main Menu
  2. Select "Settings" in Main menu
  3. Select "Device Preferences" in "Settings"
  4. Select "About" in "Device Preferences"
  5. You can confirm "Android security patch level" in "About"