Global Home Support > Digital AV > TV > Download > Download Information of TV for Taiwan

Download Information of TV for Taiwan

Update Information

Model Number
PDP
  TH-P42ST30W TH-P46ST30W TH-P50ST30W TH-P55ST30W
  TH-P65VT30W      

LCD
  TH-L32E30W TH-L37E30W TH-L42E30W  
Update Version Ver. 1.120
Update File Name / Size
  • N115_1120.zip / 49,923,213 bytes
Update Date Jun. 21, 2012
Improvements
Date/Version Description
Jun. 21, 2012
Ver. 1.120
  1. Improvement of Skype camera compatibility.
Sep. 28, 2011
Ver. 1.100
  1. TV CAST service has been upgraded to TV Connect.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your TV.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto an SD Memory Card.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your TV.

Panasonic recommends that you update the firmware in your TV if either of the following conditions exists:Gf the firmware version indicated is older than the version being offered, please update firmware.
It will only be necessary to update the software if the version that you have in your TV is older than the version being offered.

    Steps
  1. Turn the power ON
    Press [Menu] button to display Main Menu
    Select "Setup" in Main menu


  2. Select "System Menu" in "Setup Menu"

       
    Select "System Information" in "System Menu"

  3. Confirm "software Version"

     

    If the firmware version indicated is older than the version being offered, please update firmware.
    (Please update firmware, if [****] is smaller than [1120].)

Step 2. Download an updated version of the firmware and double click the downloaded file to decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

  2. Download

If the version of the firmware installed in your TV is lower than the newest version of the firmware available, please download the newest version of the firmware.
Use of software downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehand.

Please push the button when agreeing to the agreement.

You can download source code for the programs licensed under the GNU LESSER
General Public License from the following button.


Download and save the firmware in the folder you created in the above step.
Please confirm the file size that downloaded, and compare the file size of the top mentioned above with the file size.
If they were the same, a normal download was completed.

3.Double click the downloaded file

You may see following screen after you have double clicked the downloaded file, please ignore it and just click "Run" button and move to the next step.

 

< Fig.1 Security Warning >
 
 

4.The self-extracted file SDDL.SEC will appear.