Global Home Digital AV Support > TV > Download > Download Information of TV for North America

Download Information of TV for North America

Update Information

Model Number
North America
  PDP models      
    TC-65PS64 TC-P65S60 TC-P60S60 TC-P55S60
    TC-50PS64 TC-P50S60 TC-P42S60  
Update Version Ver. 2.212
Update File Name / Size
  • P131_2212.zip / 97,329,645 bytes
Update Date Feb. 3, 2014

Improvements
Date/Version Description
Feb. 3, 2014
Ver. 2.212
  1. Improve system stability.
Oct. 22, 2013
Ver. 2.211
  1. Change smart phone application name to TV remote.
Aug. 20, 2013
Ver. 2.208
  1. Stability of system.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your TV.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto a USB flash memory.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your TV.

Panasonic recommends that you update the firmware in your TV if either of the following conditions exists:Gf the firmware version indicated is older than the version being offered, please update firmware.
It will only be necessary to update the software if the version that you have in your TV is older than the version being offered.

    Steps
  1. Turn the power ON
    Press [Menu] button to display Main Menu
    Select "Setup" in Main menu

     

  2. Select "Version" in "Help Menu"

     

  3. Confirm "software Version"

     

    If the firmware version indicated is older than the version being offered, then please update the firmware.
    (Please update firmware, if [****] is smaller than [2212].)

Step 2. Download an updated version of the firmware and double click the downloaded file to decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

  2. Download

If the version of the firmware installed in your TV is lower than the newest version of the firmware available, please download the newest version of the firmware.
Use of software downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehand.

Please push the button when agreeing to the agreement.

You can download source code for the programs licensed under the GNU LESSER
General Public License from the following button.

Source code download

Download and save the firmware in the folder you created in the above step.
Please confirm the file size that downloaded, and compare the file size of the top mentioned above with the file size.
If they were the same, a normal download was completed.

3.Double click the downloaded file

You may see the following screen after you have double clicked the downloaded file, please ignore this and just click the "Run" button before continuing to the next step.

 

< Fig.1 Security Warning >
 
 

4.The self-extracted file SDDL.SEC will appear.