Global Home Digital AV Support > TV > Download > Download Information of TV for Latin America

Download Information of TV for Latin America

Update Information

Model Number
Latin America
  PDP models      
    TC-P42X60H TC-P42X60L TC-P50X60H TC-P50X60L

  LCD models      
    TC-L32B6H TC-L32B6L TC-L32XM6H TC-L32XM6L
    TC-L39B6H TC-L39B6L    
Update Version Ver. 9.009
Update File Name / Size
  • P131_9009.zip / 28,715,071 bytes
Update Date Aug. 20, 2013

Improvements
Date/Version Description
Aug. 20, 2013
Ver. 9.009
  1. Stability of system.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your TV.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto a USB flash memory.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your TV.

Panasonic recommends that you update the firmware in your TV if either of the following conditions exists:Gf the firmware version indicated is older than the version being offered, please update firmware.
It will only be necessary to update the software if the version that you have in your TV is older than the version being offered.

    Steps
  1. Turn the power ON
    Press [Menu] button to display Main Menu
    Select "Setup" in Main menu


  2. Select "System Menu" in "Help Menu"


  3. Confirm "software Version"

     

    If the firmware version indicated is older than the version being offered, then please update the firmware.
    (Please update firmware, if [****] is smaller than [9009].)

Step 2. Download an updated version of the firmware and double click the downloaded file to decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

  2. Download

If the version of the firmware installed in your TV is lower than the newest version of the firmware available, please download the newest version of the firmware.
Use of software downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehand.

Please push the button when agreeing to the agreement.

Download and save the firmware in the folder you created in the above step.
Please confirm the file size that downloaded, and compare the file size of the top mentioned above with the file size.
If they were the same, a normal download was completed.

3.Double click the downloaded file

You may see the following screen after you have double clicked the downloaded file, please ignore this and just click the "Run" button before continuing to the next step.

 

< Fig.1 Security Warning >
 
 

4.The self-extracted file SDDL.SEC will appear.