Global Home Digital AV Support > TV > Download > Download Information of TV 2010-year Models for North America (D2, LD24 series)

Download Information of TV 2010-year Models for North America (D2, LD24 series)

Update Information

Model Number
North America  
  TC-L37D2   TC-42LD24
  TC-L42D2    
Update Version Ver. 3.10
Update File Name / Size
  • N103_310.zip / 5,012,349 bytes
Update Date Jun 3, 2010

Improvements
Date/Version Description
Jun 3, 2010
Ver. 3.10
  1. Improvement for HDMI connection.

Firmware Update Procedures

Perform steps 1 through 4 listed below.

  • Step 1: Check the current version of firmware used by your TV.
  • Step 2: Download an updated version of the firmware and double click the downloaded file to decompress it.
  • Step 3: Copy the firmware file onto an SD Memory Card.
  • Step 4: Install the firmware update.

Step 1. Check the current version of firmware used by your TV.

Panasonic recommends that you update the firmware in your TV if either of the following conditions exists:Gf the firmware version indicated is older than the version being offered, please update firmware.
It will only be necessary to update the software if the version that you have in your TV is older than the version being offered.

    Steps
  1. Turn the power ON
    Press "Menu" button to display Main Menu on the remote control.

       
    Select "Setup" and press "OK"  

  2. Scroll down to "about" (on the next page)

       
    Select "About" in "Setup Menu"
       
    Select "Version" and press "OK"
     
       

  3. Confirm "software Version"

     

    If the firmware version indicated is older than the version being offered, please update firmware.
    Please update firmware if the forth digit from the end is "0" or same as [****-0***].

Step 2. Download an updated version of the firmware and double click the downloaded file to decompress it.

  1. Make a temporary folder on your PC for downloading the file,e.g. C:/Temp.

  2. Download

If the version of the firmware installed in your TV is lower than the newest version of the firmware available, please download the newest version of the firmware.
Use of software downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehand.


Please push the button when agreeing to the agreement.

Source code download

Download and save the firmware in the folder you created in the above step.
Please confirm the file size that downloaded, and compare the file size of the top mentioned above with the file size.
If they were the same, a normal download was completed.

3.Double click the downloaded file

You may see following screen after you have double clicked the downloaded file, please ignore it and just click "Run" button and move to the next step.

 

< Fig.1 Security Warning >
 
 

4.The self-extracted SDImage.bin will appear.