LUT icon LUT library management

LUT management includes actions such as adding or deleting LUTs.

Renaming/deleting LUTs

Preparation
<When selecting [Camera] in step 2>

  1. Establish a Bluetooth connection with the camera.
  1. 1Tap LUT icon.
  2. 2Switch to the library you will browse ([Device] or [Camera]).
    • If you select [Camera], establish a Wi-Fi connection. Select [Join] to connect the devices.
  3. 3Select a LUT and then [Change Name] or [Delete].
  • Only half-width (single-byte) alphanumeric characters or symbols can be used for the names of LUT files added to LUMIX Lab.
  • File names can be up to 95 characters.

Adding LUTs on a smartphone to LUMIX Lab

  1. 1Tap LUT icon.
  2. 2Switch to browsing the [Device] library.
  3. 3Tap Download icon.
    • The smartphone file selection screen is displayed.
  4. 4Select the data to add.
  • LUTs you add are listed on the bottom row of the LUT library on the [Device] side.
  • You can add “.cube” files (33-grid 3D LUTs) or “.zip” archives (containing LUTs created in LUMIX Lab).
  • Only half-width (single-byte) alphanumeric characters or symbols can be used for the names of LUT files added to LUMIX Lab.
  • LUTs cannot be added directly to the [Camera] library.

Sharing LUTs

  1. 1Tap LUT icon.
  2. 2Switch to browsing the [Device] library.
  3. 3Select [Share], then select where to share the LUT.
    • Follow the instructions displayed on your smartphone.
  • Before 3D LUT files in 33-grid Cube format are shared, they are compressed as a “.zip” archive.