Image App (iOS) - Digital Video Camera - | Image App | Digital AV Software | Digital AV | Support

Preparation : Connect smartphone to video camera via Wi-Fi.

Start this application and tap at bottom of screen Video / still picture thumbnails are displayed.
Tap a thumbnail to open
The playback screen is displayed.
- Scroll (finger drag up / down) thumbnail display screen to display previous / next screen.
- Will show for video thumbnails.
- Will be displayed on videos / still pictures protected on video camera.
- 3D videos are converted into 2D video. 3D still pictures are converted into 2D still pictures.
- When using HC-X920 / X929 / X920M / V520 / V520M / V720 / V727 / V720M / V727M, scenes recorded in iFrame cannot be played.

Note:

Depending on signal strength, screen may take time to display and/or scrolling may not be smooth.
When playing back video, if the image quality of the video is high or the signal is weak, the playback may not run smoothly and skip frames.
Depending on the type of smartphone, you may not be able to save or play. Please check your smartphone specifications to confirm compatible video types.
When displaying enlarged images, there may be some grid-shaped noise in the enlarged image. This noise appears when the image is enlarged, and it does not mean that there is noise in the original image.
For videos or still pictures that cannot be played back with this application, the "!" thumbnail will be displayed.
When is displayed in the thumbnail, you cannot save the still picture or video to your smartphone. There is a possibility that even if the icon is not displayed, depending on the model of your smartphone, you will be unable to save.

About scenes recorded in AVCHD

Playback may not occur normally depending on the smartphone model.
Playback of the last few seconds of a scene and of scenes only a few seconds long may not occur normally.
Fast-forwarding / rewinding may take time depending on the smartphone model.
Playback may stop if the screen is rotated horizontally / vertically during playback.
When setting [Playback settings] > [AVCHD playback quality] to [High quality] in the Menu, sometimes playback will not occur normally depending on the smartphone model. In such cases, please change the [AVCHD playback quality] setting in [Menu] > [Playback settings] to [Standard quality] and attempt playback.

Tap / (one of the two will be displayed) at the top of the screen
Referent list appears.
Tap selected referent

Referent list follows:

[Video camera (SD)]*	Videos / still pictures saved on the SD card inserted in the video camera

[Video camera (built-in memory) ]*	Videos / still pictures saved in the video camera internal memory

[Camera Roll]	Videos / still pictures stored in [Camera Roll]

* Not displayed when not connected to Wi-Fi. It may take time to be displayed.

On the thumbnail display screen, tap recording format icon (*1) on top of screen to display the following list. You can tap the recording format you want to display to switch the display.

AVCHD *2
MP4/iFrame *3 *4
MP4 *3
JPEG
4K *4 *5
4K(MP4) *4
2160/24p *4 *5
1080/24p *4 *5
24p *4 *5
Backup *4
Backup for Twin Camera *4 *5

*1 Icon when [AVCHD] is selected. The icon will change based on the recording format.
*2 Not displayed when the referent is [Camera Roll].
*3 iFrame scenes and scenes saved in highlights, highlighted stored scenes and iFrame scenes are also displayed.
*4 Will not be displayed if the recording format does not support it.
*5 Displayed according to the device you are using.

Selecting multiple videos / still pictures

Tap [Select] at top of Multi Playback screen and check several images for multiple selection. Tap [Cancel] to return to original screen.

Sending unsent videos / still pictures

Tap at top of thumbnail display screen to display unsent video / still picture list and choose options. Number of unsent videos / still pictures is shown together with this icon.