Global Home Digital AV Support > Digital AV Software > Image App > Image App (Android) - Digital Camera -

Image App (Android) - Digital Camera -

Wi-Fi connection

Wi-Fi connects automatically when pairing the camera with Bluetooth.
Please refer to the digital camera operating instructions when making a Wi-Fi connection without using Bluetooth.

Bluetooth connection (Pairing) *1*2

Cloud backup and Wi-Fi connection is automatically performed by connecting your camera via Bluetooth.

*1 Compatible models : DC-G90 G91 G95 TZ95 TZ96 TZ97 ZS80 FZ1000M2 FZ10002 LX100M2 GX9 TZ200 TZ202 TZ220 ZS200 ZS220 GH5S G9 GH5
*2 Compatible devices
: Android 5.0 or later, Bluetooth 4.0 or later installed
  (Except for some devices that do not support Bluetooth Low Energy)


  1. Please put the camera on pairing standby mode
    • See digital camera operating instructions for details.


  1. Tap displayed at the bottom of the screen, then tap
  2. Activate [Bluetooth]
  3. Select the device name displayed on the camera’s screen from the [Camera enable to be registered] list*
    * Up to 18 characters of the device name are displayed.
    • Bluetooth connection between the camera and the smartphone will be made.
      Select [Connection] to connect to Wi-Fi.

Connecting for the second and subsequent times

  1. Tap displayed at the bottom of the screen, then tap
  2. Select [Camera registered]


  • [ ] is displayed on the camera recording screen during a Bluetooth connection. When the Bluetooth function is enabled, but a connection is not established, [ ] appears translucent.
  • When it takes time to set up pairing between a smartphone and a camera, delete the pairing information of both devices and register them again. This may enable the devices to be recognized properly.
  • Once you set up pairing, you can connect with just your smartphone next time.
    (It is necessary to turn the camera's [Bluetooth] on.)
  • Even if you set up pairing with more than one smartphone, you can only connect to one smartphone at a time.