Registering your smartphone using the QR code document

Important:
•
This registration is only applicable for residents that don’t have a room monitor.
•
This feature may not be available depending on your facility’s system configuration.
•
Make sure to receive the QR code document from your facility staff.
•
Complete the registration within the period specified in the QR code document.
•
Contact your facility staff in the following situations.
–
you need a reprint of the QR code document
–
you want to extend the registration period after it has expired
–
you need to re-register or stop the registration of a smartphone
•
Smartphones can also be registered using a PC in the facility staff office. For more information, consult your facility staff.
1.
Have the QR code document at hand for reference.
image
2.
Using your smartphone image
Start the [Video Intercom System] app by tapping its icon (shown below).
•
Follow the on-screen instructions.
•
Confirm all of the displayed permission screens and agree as necessary.
image
3.
Read the displayed license agreement and tap [Agree].
4.
Read the displayed 1st initial setting guide and tap [Next].
5.
Read the displayed 2nd initial setting guide and tap [Next].
•
"Scan the QR code." and "Manual Input" are displayed.
6.
Tap [Scan the QR code.] and scan the QR code in the QR code document (see image in step 1).
•
If you could not scan the QR code and selected [Manual Input] in this step, tap [Manual Input] and the applicable parameter, and then correctly enter the information shown under "Manual Input" in the QR code document (see image in step 1). When finished, tap [OK].
7.
Tap the smartphone name field and enter the desired name (up to 3-10 characters). When finished, tap [OK].
8.
When "Registration is completed!" is displayed, tap [OK].
9.
After registration is completed, the log screen of a smartphone registration completion notification is displayed.