Registering your smartphone using the room monitor

Important:
•
This feature is only applicable for residents that have a room monitor.
1.
Using your smartphone image
Start the [Video Intercom System] app by tapping its icon (shown below).
•
Follow the on-screen instructions.
•
Confirm all of the displayed permission screens and agree as necessary.
image
2.
Read the displayed license agreement and tap [Agree].
3.
Read the displayed 1st initial setting guide and tap [Next].
4.
Read the displayed 2nd initial setting guide and tap [Next].
5.
Using the room monitor image
From the home screen, tap [Settings] → [Smartphone].
•
The smartphone list is displayed.
6.
Tap an empty memory location, or tap [Add].
7.
Read the displayed message and tap [OK].
8.
Read the displayed message and tap [OK].
•
"QR code" and "Manual Input" are displayed.
9.
Tap [QR code] to display the QR code.
•
If you cannot scan the QR code, tap [Manual Input].
10.
Using your smartphone image
Tap [Scan the QR code.] and scan the QR code displayed on the room monitor.
•
If you could not scan the QR code and selected [Manual Input] in step 9, tap [Manual Input] and the applicable parameter, and then correctly enter the information displayed under "Manual Input" on the room monitor. When finished, tap [OK].
11.
Tap the smartphone name field and enter the desired name (up to 3-10 characters). When finished, tap [OK].
12.
Using the room monitor image
The registered smartphone’s name is displayed once the previous operations are completed. Tap [OK].
•
When finished, tap image.
13.
Using your smartphone image
When "Registration is completed!" is displayed, tap [OK].
14.
After registration is completed, the log screen of a smartphone registration completion notification is displayed.
Note:
•
Complete the registration within about 5 minutes.