Registering devices

If you purchased devices that are not registered, you must register them before you can use them.
Note:
•
To register a mobile device, use the procedure described in the following.
–
Floor cameras: Registering other mobile devices to the floor camera
–
Shelf cameras: Registering other mobile devices to the shelf camera
–
Window cameras: Registering other mobile devices to the window camera
–
Front door cameras/outdoor cameras: Registering your mobile device to additional access points
–
HD cameras: Registering other mobile devices to the HD camera

Registering shelf cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [SHELF Camera].
3.
Perform the procedure described in Initial setup, starting from step 3.

Registering floor cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [FLOOR Camera].
3.
Perform the procedure described in Initial setup, starting from step 3.

Registering window cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [WINDOW Camera].
3.
Perform the procedure described in Initial setup, starting from step 3.

Registering access points

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Perform the procedure described in Initial setup, starting from step 2.

Registering front door cameras and outdoor cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [OUTDOOR Camera] or [FRONT DOOR Camera].
3.
If you are close to the access point and can press its SETUP button:
Press and hold the access point’s SETUP button until the access point’s LED indicator blinks slowly in green, and then tap [Tap here to continue].
If you are not close to the access point and cannot press its SETUP button:
Tap [Tap here if AccessPoint isn’t close].
•
If there are multiple access points, select the access point that you want to register the device to.
4.
Tap [Next] and follow the on-screen instructions.
5.
When prompted, press and hold the SETUP button on the camera that you want to register until the camera’s LED indicator blinks slowly in green.
•
Follow the on-screen instructions.
•
When registration is complete, the camera sounds one long beep.
•
If registration fails, the camera sounds several short beeps.
Note:
•
You can customize the name of each device for easier management. For details, see Changing the name of cameras.

Registering HD cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [Indoor HD Camera].
3.
For iPhone or iPad:
Continue from step 5 of Initial setup for iPhone, iPad.
For Android devices:
Continue from step 5 of Initial setup for Android devices.