Registering other mobile devices to the window camera

Confirm the following before you begin.
–
Make sure you have installed the [HomeHawk] app on your mobile device
–
Make sure your wireless router and the camera are turned on
–
Make sure your mobile device is connected to your wireless router
–
Make sure your mobile device can connect to the Internet
1.
Start the [HomeHawk] app by tapping its icon (shown below).
image
•
The end-user license agreement is displayed the first time you start the app.
•
Confirm all of the displayed permission screens and agree as necessary.
•
Select your country or region if displayed, and then tap [Next].
2.
Tap [WINDOW Camera].
image
3.
Tap [Connect to Existing].
4.
Follow the on-screen instructions, remove the cover from the camera, and then tap [Next].
5.
Follow the on-screen instructions and confirm the LED color on your camera.
–
If the camera’s LED indicator lights in blue, tap the blue icon and proceed to step 6.
–
If the camera’s LED indicator lights in a color other than blue, tap the icon for that color and follow the on-screen instructions.
Note:
•
When [Linking] is displayed, wait for up to about 40 seconds until the mobile device finds the camera on your wireless network.
6.
Press the SETUP button on the camera for about 2 seconds.
•
The camera’s LED indicator starts blinking in green.
7.
When prompted, enter the login password for the camera, and then tap [Next].
8.
When prompted, enter a name for the mobile device, and then tap [OK].
9.
When [Congrats!] is displayed, tap [Explore HomeHawk].
•
The app’s home screen is displayed when initial setup is completed.
10.
Reattach the cover.