Night vision mode

If there is not adequate light to illuminate the subject, such as at night, the camera can be configured to switch to night vision mode and turn on infrared LEDs.
You can select whether night vision mode is enabled or disabled.
1.
View live images from the desired camera.
2.
Open the options menu (see Displaying the options menu).
3.
Tap [Settings] → [Video Settings].
4.
Slide the [Night Vision LED] switch to the desired position.
–
When this switch is turned on, night vision mode is enabled and lights infrared LEDs so that images can be seen in the dark.
–
When this switch is turned off, night vision mode is disabled and the infrared LEDs are turned off.
•
Disabling night vision mode will reduce the visibility of images at night.