HD camera LED indicator
You can use the camera’s LED indicator to confirm the camera’s status.
Meaning of symbols used in this section
 | Indicator off |
 | Indicator lit |
 | Indicator blinking slowly |
 | Indicator blinking |
 | Indicator blinking quickly |
HD camera LED indicator
Off | | No power, or LED indicator is turned off*1 |
Blue |  | Normal operation, connected to wireless router*1, privacy shutter is open |
White |  | Normal operation, connected to wireless router*1, privacy shutter is closed |
 | Camera is searching for wireless router | |
Green |  | Initial setup required |
 | Initial setup is in progress with mobile device connected | |
 | Initial setup is starting | |
Red |  | Motion detected*1, or camera is starting up |
 | Live images are being viewed or recorded, or camera is starting up | |
 | Device malfunction |
*1
You can configure the camera so that its LED indicator does not light during normal operation or when motion is detected. See Enabling and disabling the HD camera’s LED indicator.
Enabling and disabling the HD camera’s LED indicator
1.
View live images from the desired camera.
2.
Open the options menu (see Displaying the options menu).
3.
Tap [Settings] → [Device Profiles].
4.
Slide the [Camera LED] switch to the desired position.