Adjusting the lighting

You can adjust the brightness of the camera’s light and configure the light to turn on automatically according to a schedule or when motion is detected, etc.
1.
From the [HomeHawk] app home screen, tap image → [Settings].
2.
Tap [Camera Settings] and select the desired camera.
3.
Tap [Lighting].
•
Each setting is explained in this section.

Using a schedule

You can enable the schedule so that the light is turned on and off at specified times and you can also specify the light to turn on and off at random times when you are away from home on a vacation, etc.
Slide the [Use a Schedule] switch to the "on" position to enable the schedule.
•
Slide image to specify the start time.
•
Slide image to specify the end time.
•
[Vacation Randomizer]: Turns the light on and off at random times within an hour of the times specified in the schedule.

Turning on lights after detecting motion

You can enable the light to turn on if motion is detected when it is dark.
Slide the [Motion Sensor] switch to the "on" position to enable the use of motion detection to turn on the light.
•
[Duration]: Determines how the long the light will be lit after motion is detected.

Adjusting the brightness of the light

You can adjust the brightness level for when the light is turned on through a schedule or motion detection.
Slide the [Brightness] slider to the desired level.