Using night vision (shelf cameras and floor cameras only)
If there is not adequate light to illuminate the subject, such as at night, the camera switches to night vision mode depending on the settings.
The following settings can be selected for the night vision.
1.
From the [HomeHawk] app home screen, tap 
→ [Settings].
→ [Settings].2.
Tap [Camera Settings] and select the desired camera.
3.
Tap [Night Vision].
4.
Select the desired setting and then tap [OK].
Shelf camera:
–
[ON]: Lights infrared LEDs so that images can be seen in the dark.
–
[OFF]: Turns off night vision mode.
Floor camera:
–
[Color]: Turns on the light so that images can be displayed in color. Has shorter visibility range than [Monochrome].
•
When recording is started after a detection is made or if viewing live images from a mobile device, the light will turn on if it is dark so that the images can be viewed or recorded in color.
–
[Monochrome]: Lights infrared LEDs so that images can be seen in the dark. Has longer visibility range than [Color].
–
[OFF]: Turns off night vision mode.