Using Google Home to control devices

Once you have enabled your devices for use with your Google Home, you can use your Google Home to control your devices. Devices are controlled by talking to your Google Home and using the voice commands specified in the “Panasonic HomeHawk” service.
Note:
•
Available features and voice commands are subject to change without notice. Refer to the information provided with the “Panasonic HomeHawk” skill for available features and voice commands.
•
If Google Home does not recognize the camera names or mode names assigned to your devices, try changing the camera names*1 or mode names*1.
*1
Front door cameras/outdoor cameras: Changing the name of cameras
Floor cameras/shelf cameras/window cameras: Changing the name of cameras
*2
Front door cameras/outdoor cameras: Mode name
Shelf cameras: Mode name
Floor cameras: Mode name
Window cameras: Mode name

Displaying live images from a camera (all cameras except HD cameras)

Live images from cameras can be displayed and turned off (hidden) on a TV connected to Chromecast using Google Home.
Note:
•
Chromecast must be registered to Google Home to display images from cameras.
Displaying images voice command example:
•
OK Google, show <camera name>.
•
OK Google, show <camera name> on <chromecast name>.
Hiding images voice command example:
•
OK Google, stop <chromecast name>.
Note:
•
Images stop being displayed after about 1 minute if no operations are performed.

Starting and stopping modes (all cameras except HD cameras)

Modes can be started and stopped using Google Home.
Starting modes command example:
•
OK Google, start <mode name>.
•
OK Google, activate <mode name>.
Stopping modes command example:
•
OK Google, stop <mode name>.
•
OK Google, activate Basic Mode. (front door cameras and outdoor cameras only)
•
OK Google, activate Basic. (shelf cameras, floor cameras, and window cameras only)
•
OK Google, deactivate <mode name>.

Enabling/disabling the privacy mode (shelf cameras and floor cameras only)

The privacy mode of cameras can be enabled and disabled.
Enabling privacy mode voice command example:
•
OK Google, turn on privacy mode of <camera name>.
Disabling privacy mode voice command example:
•
OK Google, turn off privacy mode of <camera name>.

Checking the temperature of cameras (shelf cameras and floor cameras only)

You can check the temperature of the area surrounding the camera.
Checking the temperature voice command example:
•
OK Google, what’s the temperature of <camera name>.

Adjusting the lighting of cameras (floor cameras only)

You can adjust the lighting of the camera.
Adjusting the lighting voice command example:
•
OK Google, turn on <camera name + light>.
•
OK Google, set <camera name + light> to xx %.
•
OK Google, brighten <camera name + light>.
•
OK Google, dim <camera name + light>.
•
OK Google, turn off <camera name + light>.