Mobile device features (overview)

You can configure settings for your mobile device.

Editing mobile device names

1.
From the [HomeHawk] app home screen, tap image → [Settings].
2.
Tap [Mobile Device Settings].
3.
Tap [Name] and enter the desired name.
4.
Tap [OK].

Adjusting mobile device speaker and microphone volume (Android devices only)

You can adjust the volume of your mobile device’s microphone, which determines the volume of your voice that is sent to the camera when talking to the camera, and your mobile device’s speaker, which determines the volume of the camera audio that is heard on your mobile device.
1.
From the [HomeHawk] app home screen, tap image → [Settings].
2.
Tap [Mobile Device Settings].
3.
Under [Mic Volume], select the desired volume for the microphone.
4.
Under [Speaker Volume], select the desired volume for the speaker.
Note:
•
Speaker and microphone settings are not available for window cameras.

Remote access mode settings

Determines the protocol used when viewing camera images while away from home. This setting is set to [UDP] by default and normally should not be changed. Select [TCP] if camera images are not displayed, and [Loading...] is displayed for a long period when you are trying to view camera images.
1.
From the [HomeHawk] app home screen, tap image → [Settings].
2.
Tap [Mobile Device Settings] → [Remote Access Mode].
3.
Select the desired value and then tap [OK].