Registering devices

If you purchased devices that are not registered, you must register them before you can use them.
Note:
•
To register a mobile device, use the procedure described in the following.
–
Floor cameras: Registering other mobile devices to the floor camera
–
Shelf cameras: Registering other mobile devices to the shelf camera
–
Front door cameras/outdoor cameras: Registering your mobile device to additional access points
–
HD cameras: Registering other mobile devices to the HD camera

Registering shelf cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [SHELF Camera].
3.
Perform the procedure described in Initial setup, starting from step 3.

Registering floor cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [FLOOR Camera].
3.
Perform the procedure described in Initial setup, starting from step 3.

Registering access points

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Perform the procedure described in Initial setup, starting from step 3.

Registering front door cameras and outdoor cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [OUTDOOR Camera] or [FRONT DOOR Camera].
3.
If you are close to the access point and can press its SETUP button:
Press and hold the access point’s SETUP button until the access point’s LED indicator blinks slowly in green, and then tap [Click here to continue].
If you are not close to the access point and cannot press its SETUP button:
Tap [Click here if you are not close to the Access Point].
•
If there are multiple access points, select the access point that you want to register the device to.
4.
When prompted, press and hold the SETUP button on the camera that you want to register until the camera’s LED indicator blinks slowly in green.
•
When registration is complete, the camera sounds one long beep.
•
If registration fails, the camera sounds several short beeps.
Note:
•
You can customize the name of each device for easier management. For details, see Changing the name of cameras.

Registering HD cameras

1.
From the [HomeHawk] app home screen, tap image → [Add Camera(s)].
2.
Tap [Indoor HD Camera].
3.
For iPhone or iPad:
Continue from step 5 of Initial setup for iPhone, iPad.
For Android devices:
Continue from step 5 of Initial setup for Android devices.