Head on this page.
Please download the updating software.
1. Make a temporary folder on your PC for downloading the file.
2. Download and save the firmware in the folder you made in the above step.
|X1500_X2000_V12.zip / 42,960,615 bytes|
3. Extract downloaded file
4. The extracted file UPDATE.HDC should be 42,947,392 Bytes if the file size is not the same,
please download and double click the file again.
Preparation of the SD Memory Card
70 MB or more must be free on the SD Memory Card and use a SD Memory Card which has already been formatted for the HC-X1500 / X2000. Please refer your instruction book for mode details. (Use HC-X1500 / X2000 for formatting the SD Memory Card.)
When formatting the SD Memory Card, all data, including protected data, will be erased and can not be recovered. Please make sure to back up your data so you don't lose it.
Insert your formatted SD Memory Card to your SD slot on your PC.
Copy the downloaded file onto the SD Memory Card.
If your PC does not have an SD card slot, use an external USB SD Reader/Writer device.
Copy the file into the Root directory (*1) of the SD Memory Card.
(*1) Root directory = The first or top-most directory in the hierarchy.
Please update the firmware of HC-X1500 / X2000 according to following procedure.
Please check the firmware update is completed correctly.
If the version number is indicated as ver.1.2, it is correctly completed.
If you use the SD for recording purpose of digital video camera without deleting the updating software,
recording capacity will be reduced, and also may cause damage to the product.
Please delete the updating software from SD Memory Card, or format the SD Memory Card after firmware update.
If you format the SD Memory card, all the data (including protected data) will be deleted.
Please check the contents of the card before formatting.