Q10. Tray Won't Open (Disc will not come out)
![line](common/img/line_step3.gif)
- Answer:
-
If a disc is in the DVD recorder and can稚 be removed in the
normal manner please try the following:
If in "standby mode" ([Timer Mark] and [EXT Link] are on),
with a recording scheduled, press the [EXT Link] button.
If not possible to take out the disc by above procedures in other conditions than mentioned above, follow the steps shown below.
1. Press and keep [POWER] button on the unit for more than 10 seconds
to power off.
![unit](common/img/rimo_q13_2_l.jpg)
![unit](common/img/rimo_q13_2_r.jpg)
2. Unplug power cord and wait for approx. 1 minute.
3. Plug power cord.
The unit痴 display will show [SELF CHECK] or [RECOVER] and the unit becomes the condition of recovery. And when the above message goes off, it can be used.
The unit痴 display will show [SELF CHECK] or [RECOVER] and the unit becomes the condition of recovery. And when the above message goes off, it can be used.
![unit](common/img/rimo_q14_l.jpg)
![unit](common/img/rimo_q14_r.jpg)
![](common/img/null.gif)