Update Contents for DC-S1M2

- A lower-speed option has been added to SH burst shooting, including pre-burst shooting.

- When using AF, you can now set it to display auto-detection frames only for the main subject.

- When using AF, you can now set the AF frame display for human eye recognition to "rectangular".

- Enhanced tracking AF stability through algorithm improvements.

- External monitor function allows applying LUTs to live view.

- External monitor function enables displaying multiple frame markers.

- External monitor function allows showing focus frames.

- The option for the low-bitrate video format "MP4(Lite)" can now be selected.

* 3.8K (3840x2560) 29.97p/25.00p 50Mbps

- Improved compatibility when used with our interchangeable lens S-R100500 and teleconverter (DMW-STC14/STC20).

- The thermal control algorithm has been improved to make it less affected by environmental factors.

* Under certain conditions where the ambient temperature around the camera changes rapidly (for example, when moving from indoors to outdoors or when the camera is exposed to direct sunlight, causing the body temperature to rise rapidly) the video recording time could become shorter.

- When [Constant Preview] is set to [OFF], an icon indicating that the preview effect is disabled will be displayed on the shooting screen..

- ISO Auto can be set in the [ISO Displayed Setting] menu in the Custom Menu.

- Fixed a bug where the live view quality differed between standby mode and video recording mode when applying false color.

- Added a menu that allows you to display the live view with the same quality during both standby and video recording modes.

- Added a 1.6x display option for the Anamorphic Desqueeze Display.

- When Dual Native ISO is set to AUTO, the base ISO sensitivity is now visible on the ISO sensitivity setting screen.

- In both Photo Mode and Playback Mode, the default setting for functions registered to the sub video rec. button has been changed to "No Setting."

* This change takes effect after performing a reset following a firmware update.

* If you have previously customized the Fn assignment before the firmware update, the current assigned function will remain after the update.

- Improved processing time during focus stacking through algorithm enhancements.

- Wi-Fi connection with "Capture One" and wired LAN connection using a USB Ethernet adapter are now supported.

* This does not guarantee all performance capabilities.

** Click here for information on verified operation of the USB dongle.

- An [Activation] feature has been added to enable extended functions using the separately sold upgrade software key "DMW-SFU3A." By performing "Activation," the [Photo Style] [ARRI LogC3] will be added.

- Deep-focus images can now be generated by compositing images taken at multiple focal points.

- An option to automatically perform pixel refresh has been added to the menu.

- This will be automatically set to ON after the firmware update. The mechanical shutter will operate while the pixel refresh is in progress.

- Pixel refresh function runs automatically on first power-off after the firmware update.

- The color of the AF frame can now be changed.

- The frame marker function has been enhanced (up to three frame markers can now be displayed at the same time).

- Compatibility with OM Digital Solutions Co., Ltd. flash units has been improved.

- Other improvements have been made to enhance operational stability.