Global Home Support > Digital AV > Digital Camera  > Download > DC-TZ95/ZS80 Firmware update service

DC-TZ95/ZS80 Firmware update service

About downloading service

Dear Customers,
We would like to thank you for purchasing Panasonic DC-TZ95/ZS80.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

Update Contents

Model Number DC-TZ95, DC-ZS80
Update Version Ver.1.1
Update File Name / Size
  • For Windows / For Mac:
    DC-TZ95:
    TZ95_V11.zip / 103,522,344 bytes (After self-extract, TZ95_V11.bin)
    DC-ZS80:
    ZS80_V11.zip / 103,522,344 bytes (After self-extract, ZS80_V11.bin)
Update Date Jun. 23, 2021

Improvement

Date/Version Description
Jun. 23, 2021
Ver. 1.1
  • Improved the phenomenon that becomes difficult to focus at the camera zoom wide position when shooting movie with 50p.
  • The camera can be recognized when it is connected to the PC via the USB power supply port.

Firmware Update Procedures (Overview)

  • STEP 1. Check the current version of firmware used by your camera.
  • STEP 2. Download an updated version of the firmware and double click the downloaded file to decompress it.
  • STEP 3. Copy the firmware file onto an SD Memory Card.
  • STEP 4. Install the firmware update.
Caution:
  • Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera's firmware.
    Doing so can cause serious damage to your camera.
  • If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.

Actual installation steps

STEP 1: Reading the current firmware version.

Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:

If the firmware version indicated is older than the version being offered, please update firmware.
The firmware update is not necessary if the current firmware version on your camera is Version 1.1.

1. Turn the camera on.
  • (A) Camera ON/OFF button
  • (B) Mode dial
  • (C) [MENU/SET] button
2. Set the mode dial to [ P ].
3. Press [MENU/SET] button to display the menu.
4. Press [].
5. Press [] to select the [SETUP] menu icon [].
6. Press [MENU/SET].
7. Press [] to select [Version Disp.], then press [MENU/SET].
8. [Version Disp.] screen appears.
  • It is possible to check which version of firmware is on the camera.