Global Home Digital AV Support > Digital Camera  > Download >  DMC-TZ27/ZS19 Firmware update service

DMC-TZ27/ZS19 Firmware update service

About downloading service

Dear Customers,
We would like to thank you for purchasing Panasonic DMC-TZ27/ZS19.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

Update Contents

Model Number DMC-TZ27, DMC-ZS19
Update Version Ver 1.1
Update File Name/

For Windows:

  • DMC-TZ27:
    TZ27_V11.exe / 22,021,520 bytes (After self-extract, TZ27_V11.bin)
  • DMC-ZS19:
    ZS19_V11.exe / 22,021,520 bytes (After self-extract, ZS19_V11.bin)

For Macintosh:

  • DMC-TZ27: / 22,889,302 bytes (After self-extract, TZ27_V11.bin)
  • DMC-ZS19: / 22,889,302 bytes (After self-extract, ZS19_V11.bin)
Update Date Sep. 10, 2012


Date/Version Description
Sep. 10, 2012
Ver 1.1
  1. Improved picture quality for Handheld Night Shot MODE.

Firmware Update Procedures (Overview)

  • STEP 1. Check the current version of firmware used by your camera.
  • STEP 2. Download an updated version of the firmware and double click the downloaded file to decompress it.
  • STEP 3. Copy the firmware file onto an SD Memory Card.
  • STEP 4. Install the firmware update.
  • Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera's firmware.
    It may cause serious damage to your camera.
  • If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.

Actual installation steps

STEP 1: Reading the current firmware version.
  Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:
  If the firmware version indicated is older than the version being offered, please update firmware.
The firmware update is not necessary if the current firmware version on your camera is Version 1.1.

1. Turn the camera on.

A: Camera ON/OFF switch  
B: REC/PLAY switch  
C: Mode dial  

2. Slide the REC/PLAY switch (B) to [].

3. Set the mode dial (C) to [ P ].


4. Press [MENU/SET] to display the menu.


5. Press [] / [], [] / [] to select the [Setup] menu, then press [MENU/SET].

  6. Press [] / [] to select the [][Version Disp.] menu icon, then press [MENU/SET].

7. [Version Disp.] screen appears.

It is possible to check which version of firmware is on the camera.

License Agreement

Download of any file for Panasonic firmware update requires your agreement with the software agreement. You may proceed to the next step only once you have agreed. Please make sure to confirm all terms and conditions in advance to proceed to download.


Please choose the button after reading [ Warning ] sentence.