DC-TZ200/TZ202/TZ220/ZS200/ZS220 Firmware update service

About dawnloading service

Dear Customers,
We would like to thank you for purchasing Panasonic DC-TZ200/TZ202/TZ220/ZS200/ZS220.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

Update Contents

Model Number	DC-TZ200, DC-TZ202, DC-TZ220, DC-ZS200, DC-ZS220
Update Version	Ver.1.2
Update File Name / Size	For Windows / Mac: [ DC-TZ200 ] TZ200V12.zip / 99,851,755 bytes (Extracted File Name: TZ200V12.bin) [ DC-TZ202 ] TZ202V12.zip / 99,851,755 bytes (Extracted File Name: TZ202V12.bin) [ DC-TZ220 ] TZ220V12.zip / 99,851,755 bytes (Extracted File Name: TZ220V12.bin) [ DC-ZS200 ] ZS200V12.zip / 99,851,755 bytes (Extracted File Name: ZS200V12.bin) [ DC-ZS220 ] ZS220V12.zip / 99,851,755 bytes (Extracted File Name: ZS220V12.bin)
Update Date	Nov. 19, 2019

Improvement

Date/Version	Description
Nov. 19, 2019 Ver.1.2	[Exposure Comp. Disp. Setting] has been added to the [Custom] menu. Notice for The Change of Specification.
Dec. 20, 2018 Ver.1.1	Fixed bug in contrast adjustment of monitor.

Firmware Update Procedures (Overview)

Step 1. Check the current version of firmware used by your camera.
Step 2. Download the file for update and Extraction of the file.
Step 3. Copy the firmware file onto an SD Memory Card.
Step 4. Install the firmware update.

Caution:

Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera's firmware.
It may cause serious damage to your camera.
If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.

Actual installation steps

Step 1: Reading the current firmware version.

Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:

If the firmware version indicated is older than the version being offered, please update firmware.
The firmware update is not necessary if the current firmware version on your camera is Version 1.2.

The firmware version display method

Set the camera's power switch to ON.
Press the [MENU/SET] button.
Go to the [Setup] menu and select the [Version Disp.], then press [MENU/SET] button.

Step 2. Download the file for update and Extraction of the file.

License Agreement

Download of any file for Panasonic firmware update requires your agreement with the software agreement. You may proceed to the next step only once you have agreed. Please make sure to confirm all terms and conditions in advance to proceed to download.

Please choose the button after reading [ Warning ] sentence.