DMC-TZ100/TZ101/TZ110/ZS100/ZS110 Firmware update service

Actual installation steps

STEP 2. Download the updated version of the firmware with the following procedures, and self-extract it.

For Windows Users
  1. Please click “downloadEbutton on the download page to download the update contents to your PC.
    * Procedure depend on your browser and it’s version, so please make sure the procedure and where the contents will be saved by your browser in advance.
    Model Number
    Update File Name / Size
    Download
    DMC-TZ100 TZ100V12.exe / 74,366,392 Bytes download
    DMC-TZ101 TZ101V12.exe / 74,366,392 Bytes download
    DMC-TZ110 TZ110V12.exe / 74,366,392 Bytes download
    DMC-ZS100 ZS100V12.exe / 74,366,392 Bytes download
    DMC-ZS110 ZS110V12.exe / 74,366,392 Bytes download
  2. Check the file size first by selecting "properties" in the right click menu.

    <Example> please check the file size listed here.
  3. If the size is different from the one described in the download page, please download it again.
  4. Double click the contents (TZ100V12.exe or TZ101V12.exe or TZ110V12.exe or ZS100V12.exe or ZS110V12.exe) to run self-extract.
    * You may see following screen after you have double clicked the downloaded file, please click "Run" button and move to the next step.
    < Fig.1 Security Warning >
  5. You may see following screen , then select a destination folder and click the “installEto unzip.
  6. The self-extracted file (TZ100V12.bin or TZ101V12.bin or TZ110V12.bin or ZS100V12.bin or ZS110V12.bin) will be saved at the destination folder.
    The file size for TZ100V12.bin should be 74,353,664 Bytes, and the file size for TZ101V12.bin should be 74,353,664 Bytes, and the file size for TZ110V12.bin should be 74,353,664 Bytes, and the file size for ZS100V12.bin should be 74,353,664 Bytes, and the file size for ZS110V12.bin should be 74,353,664 Bytes.
For Macintosh Users
  1. Please click “downloadEbutton on the download page to download the update contents to your PC.
    * Procedure depend on your browser and it’s version, so please make sure the procedure and where the contents will be saved by your browser in advance.
    Model Number
    Update File Name / Size
    Download
    DMC-TZ100 TZ100V12.zip / 74,086,138 Bytes download
    DMC-TZ101 TZ101V12.zip / 74,086,138 Bytes download
    DMC-TZ110 TZ110V12.zip / 74,086,138 Bytes download
    DMC-ZS100 ZS100V12.zip / 74,086,138 Bytes download
    DMC-ZS110 ZS110V12.zip / 74,086,138 Bytes download
  2. Check the file size first by selecting "Information" in Finder.
  3. If the size is different from the one described in the download page, please download it again.
  4. Extract downloaded file.
    • Depending on your Macintosh setting the file maybe automatically extracted.
    • If your OS is earlier than Mac OS X 10.3, please use Extract software. If your Macintosh OS is equal or later than Mac OS X 10.3,
      double click the file, TZ100V12.zip or TZ101V12.zip or TZ110V12.zip or ZS100V12.zip or ZS110V12.zip.
  5. The extracted file TZ100V12.bin should be 74,353,664 Bytes, and the extracted file TZ101V12.bin should be 74,353,664 Bytes, and the extracted file TZ110V12.bin should be 74,353,664 Bytes, and the extracted file ZS100V12.bin should be 74,353,664 Bytes, and the extracted file ZS110V12.bin should be 74,353,664 Bytes.

STEP 3. Copy the firmware file onto an SD Memory Card. Prepare an SD Memory Card with the extracted file from STEP 2 above.

Preparation of the SD Memory Card
The size of the extracted file (TZ100V12.bin or TZ101V12.bin or TZ110V12.bin or ZS100V12.bin or ZS110V12.bin) or more must be free on the SD Memory Card and use an SD Memory Card which has already been formatted for the DMC-TZ100/TZ101/TZ110/ZS100/ZS110. Please refer your instruction book for mode details.
(Use DMC-TZ100/TZ101/TZ110/ZS100/ZS110 for formatting the SD Memory Card.)
When formatting the SD Memory Card, all data, including protected data, will be erased and can not be recovered. Please make sure to back up your important data so you don't loose it.
1. Insert your formatted SD Memory card to your SD slot of your PC.
2. Copy the extracted file (TZ100V12.bin or TZ101V12.bin or TZ110V12.bin or ZS100V12.bin or ZS110V12.bin) onto the SD Memory Card.
If your PC does not have an SD slot, use an external USB SD Reader/Writer device.
Copy the file into the Root directory (*1) of the SD Memory Card.
(*1) Root directory = The first or top-most directory in the hierarchy.
This screen in the case of Windows 7, the screen may differ by the setting. <Example: ****** file>

STEP 4. Install the firmware update

  1. Make sure to turn off the power switch.
  2. Insert the fully charged battery to the body.
    If the battery is not full, the Fig.3 will not appear.
  3. Insert the SD Memory Card prepared in STEP 3 into the DMC-TZ100/TZ101/TZ110/ZS100/ZS110.
  4. Turn on the power switch.
  5. Press to the [Playback] button.
  6. After the message of "PLEASE WAIT ..." is displayed, the following display will continuously be shown on the LCD (Fig.3).

    Version number varies according to the updated firmware used.

    Note:
    In case, if the firmware update mode (Fig3) is not shown,

    1. Turn OFF the Power once.
    2. Remove the SD card once.
    3. Start again from STEP 3 above.
    < Fig.3 The initial setup of the firmware updating process >
    If newer version or same version of firmware has already been installed, the initial setup screen(Fig. 3) will not be displayed.
    And the DMC-TZ100/TZ101/TZ110/ZS100/ZS110 will display that "NO VALID PICTURE TO PLAY". Please turn off your camera and use the camera as is. About SD Memory Card, please refer to the Note below.
  7. Press [] button to select [Yes]. The update process will start (Fig. 4 and Fig. 5).
    < Fig.4 To start the update, select YES .>
    (A): [MENU/SET] button
    (B): Cursor buttons
    < Fig.5 Location of MENU/SET and cursor buttons. >
  8. At the above screen(Fig.4), press the [MENU/SET] button(Fig.5) and the screen will change to Fig. 6.
    The DMC-TZ100/TZ101/TZ110/ZS100/ZS110 will start the update process.
    The firmware update will take about 20 to 30 seconds.
    Please do not attempt the following operations before completion of next step 9.
    • * Turning the power off and on
    • * Opening the SD Memory Card compartment
    • * Removing the SD Memory Card
    < Fig.6 Version up on Going >
  9. Once the firmware update process is completed, the DMC-TZ100/TZ101/TZ110/ZS100/ZS110 will turn off the power and turn on again then the camera will be reset to initial mode automatically.
  10. To verify the version number, follow Step1 at the beginning, the camera version number indicates 1.2, the process is completed.
  11. Turn off the power switch.
  12. Remove the SD Memory Card.

Note:
About the SD Memory Card after it has been used for a firmware update.
Please format the SD Memory Card used for the firmware update before taking photos, otherwise it may cause the DMC-TZ100/TZ101/TZ110/ZS100/ZS110 to malfunction and/or decrease the number of pictures that can be taken.