Global Home Digital AV Support > Digital Camera  > Download >  DMC-FS4 Firmware update service

Text begins from here.

DMC-FS4 Firmware update service

About downloading service

Dear Customers,
We would like to thank you for purchasing Panasonic DMC-FS4.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

[ Warning ]
For our customers safety, after this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.
(Currently there is no authorised 3rd party battery available in the market.)

Update Contents

Model Number DMC-FS4
Update Version Ver 1.1
Update File Name/
Size

For Windows:
FS4_V11.exe / 6,230,678 bytes (After self-extract, FS4_110.bin)

For Macintosh:
FS4_V11.zip / 6,162,582 bytes (After self-extract, FS4_110.bin)
Update Date 2009/6/15

Improvements

Date/Version Description
2009/6/15
Ver 1.1
  1. Improvement of battery detection for safety standards Panasonic uses.
    (After this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.)

Firmware Update Procedures (Overview)

  • STEP 1. Check the current version of firmware used by your camera.
  • STEP 2. Download an updated version of the firmware and double click the downloaded file to decompress it.
  • STEP 3. Copy the firmware file onto an SD Memory Card.
  • STEP 4. Install the firmware update.
Caution:
  • Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera's firmware.
    Doing so can cause serious damage to your camera.
  • If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.

Actual installation steps

STEP 1: Reading the current firmware version.
   
  Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:
  If the firmware version indicated is older than the version being offered, please update firmware.
The firmware update is not necessary if the current firmware version on your camera is Version 1.1.
     
 

1.Turn the camera on.

  • A [MENU/SET] button
  • B [REC]/[PLAYBECK] selector switch
  • C:[Mode] button

2.Slide the [REC]/[PLAYBACK] selector switch to [], and then press [Mode]

3.Press [] to select [NORMAL PICTURE], and then press [MENU/SET].
     
 

4. Press [MENU/SET] to display the menu.

  • You can switch menu screens from any menu item by rotating the zoom lever.
     
 

5. Press .
     
 

6. Press [] to select the [SETUP] menu icon []

     
 

7. Press .
     
 

8. Press to select [VERSION DISP.]
It is possible to check which version of firmware is on the camera.

     

License Agreement

Download of any file for Panasonic firmware update requires your agreement with the software agreement. You may proceed to the next step only once you have agreed. Please make sure to confirm all terms and conditions in advance to proceed to download.
     

[ Warning ]
For our customers safety, after this firmware update your Panasonic Digital Camera cannot be operated by unauthorised 3rd party batteries.
(Currently there is no authorised 3rd party battery available in the market.)

Please choose the button after reading License Agreement and Warning sentence.