Digital AV Support > Digital Camera > 
Compatibility > Compatibilities of Third party accessories
Text begins from here.
Compatibilities of Third party accessories
- The following results are based on Panasonic's testing. Panasonic cannot guarantee that all of the performance can be achieved when third party after market components are used.
- The results may vary due to changes in product specifications.
- Please check the instruction manual for the product specifications and usage.
- We recommend that you use the latest version of the firmware of your camera body / interchangeable lens.
[Click here to check / download the latest firmware.]
Rig
Aug. 8, 2024
| Manufacturer | Product Name | Model Number | Compatibility | Remarks | |
| BGH1 | BS1H | ||||
| SmallRig | SmallRig Panasonic LUMIX BGH1&BS1H 3024 (Sales end) | 3024 |
OK
|
OK
|
· Panasonic have confirmed that the rig can be attached to the BS1H / BGH1 main unit normally.
|
| ZACUTO | Panasonic BGH1 & BS1H Cage | Z-BGH1 |
OK
|
OK
|
|
| TILTA | Full Camera Cage for Panasonic BGH1/BS1H - Black | TA-T21-FCC-B |
OK
|
OK
|
|
| 8Sinn | 8SINN CAGE FOR PANASONIC BS1H / BGH1 | 8-BS1H C |
OK
|
OK
|
|
| WOODEN CAMERA | Panasonic BGH1/BS1H Camera Cage | A10006 |
OK
|
OK
|
|
Switcher
May 25, 2022
| Manufacturer | Product Name | Model Number | Software Version | Compatibility | Remarks | |
| BGH1 | BS1H | |||||
| ATOMOS | AtomX CAST | ATOMXCST01 | Ver.61831A4A |
OK
|
OK
|
· This is the result of checking the HDMI output setting of the BS1H / BGH1 with "AUTO".
|
| Roland | Streaming Video Switcher | V-160HD | Ver.1.08 |
OK*
|
OK*
|
|
* If the switcher setting is 720p, the image will not be displayed properly.
Remote Control
Nov. 19, 2021
| Manufacturer | Model Number | Compatibility | Cautions When Using wired Remote Controller | |
| BGH1 | BS1H | |||
| Manfrotto | MVR901EPLA |
OK
|
OK
|
＜DC-BGH1＞
· Rec/Stop, Zoom, Focus (MF operation only), Iris function are available by using wired Remote controller. Other function is not available.
· The zoom function is available with the following lenses:
◦ H-PS14042 ◦ H-PS45175 ◦ M.ZUIKO DIGITAL ED 12-50mm F3.5-6.3 EZ ◦ M.ZUIKO DIGITAL ED 14-42mm F3.5-5.6 EZ · MF operation from wired remote controller is not available with the following lenses: Micro Four Thirds lens of Panasonic equipped with "MF mode with distance scale“, M.ZUIKO lens equipped with "Snapshot focus" or "Manual Focus Clutch" or "MF (Focus mode switch)".
· MF operation from wired remote controller is not available with the following lenses, when frame rate setting is “24p” using Variable Frame Rate:
◦ M.ZUIKO DIGITAL 17mm F2.8 ◦ M.ZUIKO DIGITAL ED 14-42mm F3.5-5.6 ◦ M.ZUIKO DIGITAL ED 14-42mm F3.5-5.6L · MF operation from wired remote controller is not available when ZUIKO DIGITAL ED 70-300mm F4.0-5.6 equipped with AF/MF switch to be the condition "MF".
· MF operation from wired remote controller is not available with SIGMA products Four Thirds lens.
＜DC-BS1H＞
· Rec/Stop, Focus (MF operation only), Iris function are available by using wired remote controller. Other function is not available.
· MF operation from wired remote controller is not available with the following lens: L-Mount lens of Panasonic equipped with "MF mode with distance scale".
|
| MVR901ECLA |
OK
|
OK
|
||
| Libec | ZFC-L |
OK
|
OK
|
|
| ZC-LP |
OK
|
OK
|
||
| VariZoom | VZSTEALTH |
OK
|
OK
|
|
Zoom Lens servo drive
Nov. 7, 2022
| Manufacturer | Product Name | Model Number | Compatibility | Remarks | |
| BGH1 | BS1H | ||||
| Chrosziel | Zoom Lens servo drive | CDM-UNI-Z2 |
OK
|
OK
|
· By attaching the CDM-UNI-Z2 to a non-power zoom lens, zooming can be performed via a wired remote control.
· A rig is required to fix the CDM-UNI-Z2 under the lens.
· Operation check was performed with the following configuration.
- Lens：H-X1025/H-ES12060 (DC-BGH1) / S-E70200/S-R70300 (DC-BS1H)
- Wired remote control：MVR901ECLA (Manfrotto)
- Rig：WOODEN CAMERA
· When changing lenses, turn the CDM-UNI-Z2 power off and on to initialize.
· If the gear ring attached to the CDM-UNI-Z2 does not mesh well with the zoom ring of the lens and slides during zooming, increase the fixing strength with a rubber sheet, etc.
|
Remote Control Panel (RCP)
Nov. 7, 2022
| Manufacturer | Product Name | Model Number | Software Version | Compatibility | Remarks | |
| BGH1 | BS1H | |||||
| Skaarhoj | Remote Control Panel | RCPv2 Joystick | Ver.0.2.2 |
OK
|
OK
|
· Camera control of F number, shutter speed, ISO, White balance, manual focus and changing of AF/MF.
· Check has done under below condition
- LAN connection
- power : PoE (LAN)
|
| Cyanview | Remote Control Panel | RCP | Ver.22.3.2.RC25 |
OK
|
OK
|
|
* For RCP settings, please contact the RCP manufacturer.
External Touch Screen Monitor
Aug. 31, 2022
| Manufacturer | Product Name | Model Number | Software Version | Compatibility | Remarks | |
| BGH1 | BS1H | |||||
| Portkeys | 5.5-inch WCG on-camera monitor | BM5 III WR | BM5-V3WR.15.43.C18.B23 |
OK
|
OK
|
· Touch focus, menu operation by touch, REC, iris control, shutter speed control, ISO control, WB adjustment and color temperature control are available.
- Operation confirmed with products produced in June 2022.
|
Pan Tilt Head / Zoom Control
Aug. 31, 2022
| Manufacturer | Product Name | Model Number | Software Version | Compatibility | Remarks | |
| BGH1 | BS1H | |||||
| Datavideo | Robotic Pan Tilt Head | PTR-10 MARK II | V01.58c |
OK*/**
|
OK**
|
· Pan-tilt operation of the PTR-10 MARK II (remote control included, PTZ Camera Controller RMC-180 MARK II sold separately) is available.
· Focus, Iris control, zoom function are available.
This is the result of checking the HDMI output setting of the BS1H / BGH1 with "AUTO".
|
| PTZ Camera Controller | RMC-180 MARK II | Ver.1.120 |
OK*/**
|
OK**
|
||
| Mounting bar and holder for Tilta Nucleus M motor | ZEK-2 | - | OK | OK |
· Connect to PTR-10 MARK II to use.
|
|
| Tilta | Nucleus-M Motor Kit I | WLC-T03-M1 | Ver.18.12.19 | OK** | OK** |
· Connect to ZEK-2 to use.
|
* The zoom function is available with the following lenses.
H-PS14042, H-PS45175
H-PS14042, H-PS45175
** Zoom Control Kit ZEK-2 and Tilta's WLC-T03-M1 are required for zoom lenses other than those listed above. (Operation was confirmed with the S-R24105 lens.)
Gimbal
Oct. 20, 2025
| Manufacturer | Website | Model Number | Software Version | Compatibility | Remarks | |
| BGH1 | BS1H | |||||
| DJI | Link | DJI RS 4 Pro | v01.05.00.00 | OK |
OK |
Panasonic has confirmed the following:
· Connecting camera and gimbal with DJI USB cable, Start/Stop recording, adjust F value, shutter speed, ISO are able to operate using the gimbal operation dial.
· The camera can be attached to the gimbal, and the gimbal's image stabilization function works properly.
*Lens used for validation:
BGH1:H-ES12060 BS1H:S-R2060 |
| DJI RS 4 | v01.05.00.00 | OK |
OK |
|||
| DJI RS 4 Mini | v01.03.00.00 | OK |
OK |
|||
| DJI RS 3 Pro | v01.04.00.00 |
OK
|
OK
|
|||
| DJI RS 3 | v01.04.00.00 | OK |
OK |
|||
| DJI RS 3 Mini | v01.02.00.00 | OK |
OK |
|||