Compatibilities of DMC-G1 and DMC-GH1

(*1)
Direction detection related functions on DMC-G1/GH1(ex. a function to rotate and play back pictures vertically when they are shot with the camera held vertically) are not available.

(*2)
The firmware update on lenses to the following designated versions or later is required to enable Contrast AF(AFS mode). Please refer to the required firmware version of lenses listed in the table below.
Please note that the following Zuiko lenses are absolutely required to be updated to the designated version or later, otherwise the message "PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY" could be displayed on the camera.

<Click here to jump to the information to confirm the lens firmware version>

*For these FourThirds lenses, not only they can be updated on DMC-L10 or L1, but also on the Mount Adapter(DMW-MA1) together with G series cameras.

(*3)
When the camera is in MF mode, the image will be magnified automatically by rotating the focus ring. These lenses do not support this function. It is possible to magnify the image by pressing the left button of the 4-way controller and then pressing MENU/OK button.

(*4)
Wireless shooting is not available.

(*5)
The lens firmware Ver.1.2 or later is recommended.

(*6)
AF tracking is slower than the counterparts in HD movie support Micro Four Thirds lens(LUMIX VARIO HD lens). Also operational noise in AF may be recorded while motion picture recording.

(*7)
When movie quality setting is [AVCHD/FHD] in GH1, Focus mode is only available to manual, Not available to auto focus.

(*8)
Operational noise of the aperture in AE(Auto Exposure) control may be recorded while motion picture recording.

(*9)
The camera body firmware is required to be updated to Ver.1.1 or later for GH1, and Ver.1.3 or later for G1, respectively.

Firmware update service

The update allows the camera body to recognize the lens retraction correctly, and allows to use the lens correctly by extending it from the retracted configuration. While retracted the camera displays the warning message "PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY".

(*10)
It can be used together with a Leica M lens/Leica R lens. Please set [SHOOT W/O LENS] in the CUSTOM Menu to "ON".
Please check the Compatibilities of mount adapter DMW-MA2M and DMW-MA3R page to find the compatible lens list.

(*11)
When the camera body firmware is updated following version, it is possible to select to set the Optical Image Stabilizer not to operate OFF using STABILIZER in REC Mode menu when using a lens with an Optical Image Stabilizer function without an O.I.S. switch.

(*12)
When the camera body firmware is updated following version, AFC function or AF function for motion picture recording is improved.

(*13)
Please set [SHOOT W/O LENS] in the CUSTOM Menu to "ON"

(*14)
The message will be shown when POWER ON, but it is not a malfunction of camera.

(*15)
Operated by L-Fn button is not guaranteed.

(*16)
Auto LED light ON, and AF illuminator function is not available.

(*17)
The Manual Focus Clutch mechanism is not available, during the shuttet button is pressed halfway.

(*18)
Manual focus is not available.

(*19)
This lens isn't able to use for G1.

(*20)
<Click here to check the information to confirm the operation of Teleconverter lens>

(*21)
Refer to the FAQ page of OM Digital Solutions website to find the compatible lens list.
[ MC-14 ] https://www.getolympus.com/us/en/lenses/pen-omd/m-zuiko-digital-1-4x-teleconverter-mc-14.html
[ MC-20 ] https://www.getolympus.com/us/en/lenses/pen-omd/m-zuiko-digital-2x-teleconverter-mc-20.html

(*22)
MULTI flash is not available.

(*23)
G1 is not available.